11-26-2013, 05:53 PM | #1 |
Junior Member
Join Date: Nov 2013
Posts: 3
|
USB3 to DVI on HP EliteBook 2570
Running Windows 7
Installed USB 3 drivers Compatibility check passed No display on 3rd monitor at all. When detecting display Display: "Available display output on: Intel(R) HD Graphics 4000" Multiple Displays: "No display detected" Then I chose try to connect anyway on: Composite Display settings shows 3.Display Device on: Composite If I choose extend desktop to this display, nothing happens on 3rd monitor. Same problem with direct, or docking station. Please help, thanks! |
11-26-2013, 06:05 PM | #2 |
Junior Member
Join Date: Nov 2013
Posts: 3
|
Also, already checked that services were running and not failing to boot correctly. And have tried using full DVI cable, and DVI to VGA cable.
|
11-27-2013, 02:07 PM | #3 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Do you get this with all USB ports on your notebook? Also do you get this with issue with the other VA2232 monitor connected to the adapter? Thanks, James |
11-27-2013, 03:46 PM | #4 |
Junior Member
Join Date: Nov 2013
Posts: 3
|
Good news! I uninstalled all the drivers and removed programs from add/remove programs. And reinstalled a little differently and now it works. When I first installed, windows started installing device drivers before I had a chance to install the display link core software.
So this time before plugging the device in I installed the software I downloaded from the site, then plugged device in and windows did the same thing installing the drivers on its own but this time, it worked. For some reason, I couldnt access my D:\ drive the first time I installed so I just let windows do the drivers on its own.. Anyway, thanks for the help. Looking forward to the new setup at work!! |
|
|