Slightly shaking monitor image during hovering

[olgrim]

I use Windows 10, Display Link Model USB-VGA 165. Use for 2d screen (2 screens). Driver is updated from the web site. Everything works but I have a slightly shaking of the monitor image during hovering with mouse over anything. I lowered resolution 1280x800 from orig. 1680 x 1050. Still have the same problem. I also tried to changed USB port - No effect. The monitor brand is Acer.

This slight shaking is probably coursed by the speed of the the signal. The light on the adapter is flicking also during any hovering or pressing enter during typing.

Do you have any idea how I can fix this? It is just difficult for eyesight.

Thank you.

[AlbanRampon]

Hello,

Thank you for the details.
This doesn't sound like an issue with your host software as the monitor is not directly driven by it. The LED on the adapter is programmed to change when the adapter is receiving changes from the host, which is normal as you move the mouse.
It sounds like a hardware issue with the adapter and I would recommend you contact Plugable for support on this.

Kind regards,
Alban

[AlbanRampon]

Hello,

Thank you for the details.
This doesn't sound like an issue with your host software as the monitor is not directly driven by it. The LED on the adapter is programmed to change when the adapter is receiving changes from the host, which is normal as you move the mouse.
It sounds like a hardware issue with the adapter and I would recommend you contact Plugable for support on this.

Kind regards,
Alban