|
|
Thread Tools | Search this Thread | Display Modes |
06-14-2017, 11:54 PM | #11 |
Junior Member
Join Date: Sep 2015
Posts: 2
|
Same here
I am also having a similar problem. Rebooting with the displaylinks disconnected, Ubuntu 16.04.2 boots up fine. Connect the displaylink adapters, and it crashes X11.
I've attached the output from the support tool. |
06-19-2017, 04:47 PM | #12 |
Junior Member
Join Date: Apr 2017
Posts: 3
|
Same issue here!
Ubuntu 16.04.2(kernel 4.8) It crashes as soon as i plug in the display link. |
06-19-2017, 06:09 PM | #13 |
Junior Member
Join Date: Apr 2017
Posts: 3
|
Temporary solution
If you installed 16.04.02 you can probably boot using 4.4 kernel.
When booting up press shift to show GRUB. Then choose "Ubuntu with advanced options"(something like it) then on the list choose to boot with 4.4 generic. It worked for me. |
06-21-2017, 10:30 AM | #14 |
Junior Member
Join Date: Jun 2017
Posts: 1
|
This is, roughly speaking, my experience on Ubuntu 16.04 (kernel 4.4). Initially my system went into low graphics mode whenever I plugged in the DL monitor. This stopped once I altered 20-displaylink.conf to use the "Intel" driver, but that instead caused the system to crash whenever I plugged in the monitor or clicked "Detect Displays" or opened Chrome or looked at it too hard. This is my current 20-displaylink.conf (which is based on a working setup from another user on this forum).
Code:
Section "Device" Identifier "Intel Graphics" Driver "Intel" Option "AccelMethod" "sna" Option "TearFree" "true" Option "TripleBuffer" "true" Option "MigrationHeuristic" "greedy" Option "Tiling" "true" Option "Pageflip" "true" Option "ExaNoComposite" "false" Option "Tiling" "true" Option "Pageflip" "true" EndSection Attached is my system's output from the Displaylink Linux Support Tool. Any pointers would be greatly appreciated. |
06-26-2017, 02:21 PM | #15 | |
Junior Member
Join Date: Jun 2017
Posts: 1
|
Quote:
|
|
07-11-2017, 04:34 PM | #16 |
Junior Member
Join Date: May 2017
Posts: 3
|
I'm fixed
Updated kernel to 4.12 and then applied X11 config as in displaylink support
|
|
|