Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Windows Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-20-2016, 12:20 PM   #1
Lloyd
Junior Member
 
Join Date: Mar 2016
Location: Des Moines, IA USA
Posts: 1
Angry Displaylink caused Win 8.1-64 to stop recognizing my RAID tower and 1 of 2 printers.

Windows automatically installed DisplayLink software during an Update. My brand new computer was recognizing my Etekcity LapDock hub, but was showing the indicator for the need to update drivers for it. My RAID hard driver tower and two Epson all-in-one printers are routed thru this hub, and were working as they were supposed to.

I had to order and install a new WiFi card in for this computer to gain Internet access or use in my home, which allowed me a couple of days to explore this new computer before it updated. The hardware all worked fine. (My home has a single Internet access point, with computers connected by WiFi to it.)

After this computer gained access to the Internet, it went through a serious update of Windows 8.1 – 64 and the graphics drivers. During this update, It showed Displaylink being installed to control multiple monitors. I do have multiple monitors, but only one monitor was connected at this time.

Anyway, I allowed the Displaylink to continue to install. But problems started right after the next re-boot. My RAID tower became unrecognized, along with my more advanced of the two Epson printers.

Removing the Etekcity LapDock hub and replacing it with a 4 or 5 year old Toshiba Hub caused the software to reclassify the hardware with the same results the RAID tower or the newer printer. I have verified with a different computer that the RAID Tower and printer are functioning properly.

That leaves your software as the problem. Disabling your software from starting with Windows does not seem to help. I tried that.

So how can I get my equipment to start working properly again, along with getting your software off of my computer?

Lloyd

Last edited by Lloyd; 03-20-2016 at 12:25 PM.
Lloyd is offline   Reply With Quote
Old 03-21-2016, 02:55 PM   #2
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,644
Arrow

There is a support ticket open for that but it doesn't have all that information.
I suggest you add it to the ticket.

Our software does NOT decide what device it is associated to. The operating system decides which drivers to use based on the product identification, but we'll look at that in the ticket once we have the log files.
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Reply

Tags
displaylink, hardware problem, technical support needed

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.