Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-02-2012, 12:00 AM   #1
teufeldog
Junior Member
 
Join Date: Feb 2012
Posts: 1
Default 10.7.3 incompatibility?

I just updated to 10.7.3 and upon reboot all my screens are blue, except for my DisplayLink screen which remains black. I have to unplug everything to get my MacBook Pro screen to display again. I'm then able to plug in my mini DisplayPort adapter for one monitor, but when plugging in the USB DisplayLink adapter everything goes blue again (black for DisplayLink).

Known issue?
teufeldog is offline   Reply With Quote
Old 02-02-2012, 01:44 AM   #2
philip
Member
 
Join Date: Jul 2011
Posts: 46
Default

SAME EXACT ISSUE!

I'm so glad I'm not the only one. I already posted what display link manager gave in the thread I made about this.They're going to ask you for what this http://www.displaylink.com/support/ticket.php?id=269 output (a zip file with logs and your system information). I would do so to save the time of them asking you.
philip is offline   Reply With Quote
Old 02-02-2012, 02:28 AM   #3
rickbdotcom
Junior Member
 
Join Date: Feb 2012
Posts: 6
Default

Same here after upgrading to 10.7.3 today.
Attached Files
File Type: zip DisplayLink Information.zip (230.1 KB, 8 views)
rickbdotcom is offline   Reply With Quote
Old 02-02-2012, 02:34 AM   #4
rickbdotcom
Junior Member
 
Join Date: Feb 2012
Posts: 6
Default

And here's a crash log.
rickbdotcom is offline   Reply With Quote
Old 02-02-2012, 03:16 AM   #5
displaylinkmarmot
Junior Member
 
Join Date: Jul 2011
Posts: 1
Unhappy Same boat

10.7.3 on a 2009 24" iMac breaks displaylink on UGA-2k-A but my MiMO um-710 works fine. The monitor that was on the UGA-2k-A just keeps flickering.
displaylinkmarmot is offline   Reply With Quote
Old 02-02-2012, 05:33 AM   #6
Sofiaan
Junior Member
 
Join Date: Feb 2012
Posts: 14
Default Same problem

I upgraded to 10.7.3 on my mid 2011 macbook air and have this issue, but it is slightly different on two different display link devices. Both devices are connected to displays that are rotated at 90 degrees and worked perfectly on 10.7.2.

The one that doesn't work gives me a blank screen on the display link monitor, but the status LED on the screen indicates that it is getting a signal of some sort. I see the LED on the display link adapter blinking in a very predictable pattern that repeats.

The other display link adapter (which is a higher resolution) works, but only in landscape mode. Not much good when my monitor is on its side . When I change the rotation to anything other than standard, I get weird patterns on the display, and there is no resolution to choose from in the display preferences window.

Thanks Phillip for posting the link to the tool. I will run it tomorrow at work. I hope there's a fix soon.
Sofiaan is offline   Reply With Quote
Old 02-02-2012, 07:43 AM   #7
GodwinC
Junior Member
 
Join Date: Feb 2012
Posts: 25
Default Also lost rotation ability..

After upgrade to 10.7.3..

However holding Command Option then press System Preference will return the rotation dropdown menu.. however it also display weird lens when switch to 90 degrees./ potrait mode.
GodwinC is offline   Reply With Quote
Old 02-02-2012, 10:36 AM   #8
rickbdotcom
Junior Member
 
Join Date: Feb 2012
Posts: 6
Default

Yes I should add I was also using a monitor in portrait mode. I'll have to check to see if it works in landscape.
rickbdotcom is offline   Reply With Quote
Old 02-02-2012, 12:44 PM   #9
volsk
Junior Member
 
Join Date: Feb 2012
Posts: 5
Default Same issue

Also the same issue in 10.7.3. I also had my displaylink display rotated.

Does anyone now how to reset the orientation? Maybe this helps to get the display at least working again.

Last edited by volsk; 02-02-2012 at 12:47 PM. Reason: Addition of question on resetting orientation
volsk is offline   Reply With Quote
Old 02-02-2012, 02:07 PM   #10
ChristianP
Senior Member
 
ChristianP's Avatar
 
Join Date: Apr 2011
Posts: 280
Default

Thanks for your reports.
Are you using the DisplayLink screen in a rotated mode? In case, could you please try this:
Boot without the DisplayLink adapter connected then run in a terminal:

sudo rm -f /Library/Preferences/com.apple.window*

rm -f /Users/"USERNAME"/Library/Preferences/ByHost/com.apple.window*

This should reset your display settings.
Reconnect the DisplayLink adapter and check if the connected display is working correctly.

We are working on trying to solve the rotated mode issue.
ChristianP is offline   Reply With Quote
Reply

Tags
1.7, 10.7.3, bvu195, diamond, lion

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.