DisplayLink 1.7b4: Loading after login!

[tthaler]

Originally Posted by tthaler

The problem gets worse and somehow mysterious.
Ok lets start.
There are 4 displays connected to a Mac Mini Lion Server Edition.
Two DVI Displays are connected directly to the Mac Mini, two are the Samsung U70 with integrated Displaylink Chipset.
Now the setup is as follows.
DVI 1 on the left top, DVI 2 on the right top, USB-Display 1 on the bottom left just below DVI 1, USB-Display 2 on the bottom right just below the DVI 2.

------------------------
|...DVI1...|...DVI2...|
------------------------
...|.USB1.|.USB2.|...
...-------------------

Well until recently, I did only have the problem, that after each restart of the Mac Mini the two USB Displays did switch their position including their content.
Now it's getting mysterious.
They don't only switch the position but they switch also their content. It's now that way, that USB1 is switching position with USB2 but also USB1 on his new position of formerly USB2 will show the content of USB2. Then after next restart USB1 will still be on his new position of formerly USB2 but now with his formerly content of the bottom left position. So after 4 restarts, the display position and the display content will be again like at the start.

Do I be the only one with such problems?
Are there any suggestions to fix this thing?

Displaylink Developer team, please make a statement for this problem.

Side note
I did update to 1.7.beta5 but the problem persists.
Any suggestion to solve this behavior?
DIYPLAYLINK Please help and respond to this: