07-29-2020, 06:11 AM | #1 |
Junior Member
Join Date: Jul 2020
Posts: 1
|
No displays on Ubuntu 20.04
Hello,
I did a fresh installation of Ubuntu 20.04 on my Thinkpad P52. After that, I installed the latest version of the DisplayLink driver without any problems. Everything works (mouse, keyboard, ethernet) but Ubuntu does not recognize the monitors connected to the Lenovo DisplayDock Pro. Under Windows it works perfectly and before under Ubuntu 18.04 I had no issues. When I connect the DisplayLink the following events appear in Syslog. [ 2235.618442] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2235.618442] USB 2-1.1: Product: ThinkPad USB 3.0 Pro Dock [ 2235.618443] usb 2-1.1: Manufacturer: DisplayLink [ 2235.618444] usb 2-1.1: SerialNumber: 455115220100225651EW [ 2235.629089] usb 2-1.1: Warning! Unlikely big volume range (=511), cval->res is probably wrong. [ 2235.629090] usb 2-1.1: [15] FU [Lenovo Audio Playback Volume] ch = 2, fall = -8176/0/16 [ 2235.629638] usb 2-1.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong. [ 2235.629639] usb 2-1.1: [12] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16 2235.651228] cdc_ncm 2-1.1:1.5: MAC Address: 6c:0b:84:22:86:e8 [ 2235.651230] cdc_ncm 2-1.1:1.5: setting rx_max = 16384 [ 2235.651369] cdc_ncm 2-1.1:1.5: setting tx_max = 16384 2235.651648] cdc_ncm 2-1.1:1.5 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1.1, CDC NCM, 6c:0b:84:22:86:e8 [ 2235.667902] cdc_ncm 2-1.1:1.5 enx6c0b842286e8: renamed from usb0 [ 2238.670276] cdc_ncm 2-1.1:1.5 enx6c0b842286e8: 1000 mbit/s downlink 1000 mbit/s uplink [ 2238.686308] cdc_ncm 2-1.1:1.5 enx6c0b842286e8: network connection: connected [ 2238.686353] IPv6: ADDRCONF(NETDEV_CHANGE): enx6c0b842286e8: link becomes ready [ 2245.852049] evdi: [D] evdi_painter_connect:738 (dev=-1) Process is trying to connect [ 2245.852050] evdi: I] Task 59420 (DesktopManagerE) or process 59409 (DisplayLinkMana) [ 2245.852052] evdi: [D] evdi_painter_connect:788 (dev=1) Connected with 0000004cc7c9ba [ 2245.852054] evdi: [D] evdi_detect:90 (dev=1) poll connector state: connected Any idea what's going on here? Cheers, Karl |
|
|