Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Windows Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-24-2013, 05:57 PM   #41
HenkD
Junior Member
 
Join Date: Nov 2012
Posts: 5
Default same with Dynadock

I had exactly the same issue. Ethernet driver wasn’t recognized, same for the audio.
I have an ASUS N56 notebook with Dynadock U3.0. I completed the 4 steps above. It worked for both the Ethernet and the audio driver
HenkD is offline   Reply With Quote
Old 09-13-2013, 08:24 PM   #42
jwiese
Junior Member
 
Join Date: Sep 2013
Posts: 4
Default No love on Surface Pro for me

I am having the issue on a Surface Pro machine. Both Windows 8 and now Windows 8.1 (RTM) are showing the same signs. It shows as working "Limited Connection" (network glyph with a yellow exclamation on it). I see lights flickering on the back of the device but get no network. Attached is my diag output. Device manager shows all is good and that my drivers are up to date.
Attached Files
File Type: zip JWIESEPRO_20130913_141450.zip (542.7 KB, 1 views)
jwiese is offline   Reply With Quote
Old 07-07-2014, 07:55 AM   #43
Knoxy2212
Junior Member
 
Join Date: Jul 2014
Posts: 1
Default Same Issue No Ethernet Connection

No link lights on Ethernet port, cable is plugged in and installation completed multiple times using latest drivers 7.6M1.

Support files attached, your help would be greatly appreciated.
Attached Files
File Type: zip PETER_20140707_164632.zip (738.1 KB, 4 views)
Knoxy2212 is offline   Reply With Quote
Old 07-07-2014, 11:37 AM   #44
JamesH
Senior Member
 
Join Date: Jan 2012
Posts: 1,523
Default

Hi,

This can happen if you are using a half duplex connection typically used by network hubs: http://www.displaylink.com/support/ticket.php?id=299

Can you check if this is the case?

Thanks,
James
JamesH is offline   Reply With Quote
Old 07-29-2015, 10:14 PM   #45
Travis9x
Junior Member
 
Join Date: Jul 2015
Posts: 1
Angry Ethernet connection of dock vanishes if connected computer goes to sleep

My company recently started trying to use Targus Universal USB 3.0 DV docking stations (with power) with some new Dell XPS 13 laptops. I'm their computer support specialist, so it's my responsibility to get the new machines up & running. I've immediately noticed problems with these docking stations, in that if the laptop "falls asleep" while connected to it, upon wakeup the Ethernet adapter is just gone. It doesn't show as disconnected, it's just simply not there anymore. Unplugging the dock from the USB and plugging it back in again does nothing to restore the Ethernet adapter. I end up having to uninstall the software/drivers, and re-install them before the Ethernet adapter in the docking station will be seen again. This is ridiculous. This is clearly a widespread issue (as seen in the Amazon reviews for the product), so why haven't problems like this been addressed yet?
Travis9x is offline   Reply With Quote
Old 02-02-2016, 06:12 PM   #46
makinmyway
Junior Member
 
Join Date: Feb 2015
Posts: 3
Default Ethernet Works off and on Now

I can get the ethernet to work every time if I disconnect it from the Targus and connect it directly with my laptop. However recently though not always I can't get an internet connection when the ethernet is running through the Targus. The orange ethernet light on the Targus is lit when this is the case.
Attached Files
File Type: zip MICHAEL_20160202_085316.zip (1.87 MB, 1 views)
makinmyway is offline   Reply With Quote
Old 02-03-2016, 09:18 AM   #47
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
Arrow

Hello, May you please create a new thread?
People from 3 years ago will receive all replies and they might not be willing anymore.
You computer is connected to the Internet and can talk with google.com (ping) within 97ms. It's also connected to Microsoft.
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Old 03-08-2016, 09:34 AM   #48
sky572789
Junior Member
 
Join Date: Mar 2016
Posts: 1
Default Solution for Ethernet Connection not Detect

Device Manager > Select DisplayLink Network Connection (or similiar) > Right click to access to Properties > Advanced > Speed & Duplex > change to 100Mbps/1.0Gbps (depends on your connection cable/speed) from the default value "Auto".

This solve your problem!
Attached Images
File Type: jpg DS3100.jpg (19.2 KB, 2 views)
sky572789 is offline   Reply With Quote
Reply

Tags
gigabit ethernet, targus, usb 3.0

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.