09-05-2013, 06:49 PM | #1 |
Junior Member
Join Date: Sep 2013
Posts: 4
|
Bum Dock? (Lenovo USB 3.0)
How do I tell if the problems I am having with my dock are software or hardware? I have the latest 8.1 driver (7.4) and my firmware from Lenovo is up to date. The dock keeps being disconnected from the laptop (X1 Carbon Touch) rendering it almost useless. Any help would be greatly appreciated. Thanks!
|
09-06-2013, 01:48 PM | #2 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Please run through this guide: http://www.displaylink.org/forum/showthread.php?t=896 If the issue persists please attach the debug logs: http://www.displaylink.com/support/ticket.php?id=269 Thanks, James |
09-18-2013, 05:00 PM | #3 |
Junior Member
Join Date: Sep 2013
Posts: 4
|
Happening again
Sorry for the delay. The dock suddenly started working without issue until today when it again has gone back into the circular pattern of connecting and disconnecting every few seconds. Attached are the debug logs.
|
09-23-2013, 09:49 AM | #4 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
The support files tell us that there are usb connection errors. Can you check if you have the latest hub firmware programmed? Open up device manager, open up Universal Serial Bus controllers and right click on the entry called “Generic SuperSpeed USB Hub”. Select “Properties”, select “Details”, change “Property” to “Hardware Ids” and the REV_xxxx value will tell you what version of firmware is programmed on the hub. Let me know what revision is reported. I didn't see the System_Details file in the collected logs - can you attach this so I can advise on your system? It's also worth trying the "System Compatibility Check" option in the DisplayLink debug tool to see if anything is flagged up. Thanks, James |
09-23-2013, 04:57 PM | #5 |
Junior Member
Join Date: Sep 2013
Posts: 4
|
The Generic Superspeed USB Hub shows up twice in the Device manager, both with the same hardware ID: USB\VID_2109&PID_0811&REV_2198.
The compatibility check shows: Pass: Basic mode support Pass: Device attached Pass: Device started correctly Pass: Graphics driver date Pass: WEI is above recommended 3 Pass: No Other USB graphics software installed System Details attached. Thanks! |
09-27-2013, 03:25 PM | #6 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Thanks for the info. I'd try the other port(s) on the system you are using and if possible try a different USB cable. Thanks, James |
10-07-2013, 05:25 PM | #7 |
Junior Member
Join Date: Sep 2013
Posts: 4
|
I will try a new cable but since this is a Lenovo X1 Carbon Touch, it only has one USB 3.0 port. Thanks!
|
Tags |
disconnect, lenovo usb 3.0 |
|
|