Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Windows Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-08-2018, 04:39 PM   #1
nordiccamel
Junior Member
 
Join Date: May 2018
Posts: 5
Default Windows 1803 BSOD PNP_Detected_Fatal_Error

I have 4 different models of computers that have be updated to Windows 1803. All of them are experiencing the same issues with our DisplayLink USB display adapters.

Surface 4 Pro
Surface 3 Pro
HP EliteBook x360 1030 G2
HP Probook 650 G1

As soon as they finished the 1803 upgrade and rebooted they BSOD'd. The message is PNP_Detected_Fatal_Error. If you unplug the Display Link adapter, the computer boots fine.

The issue can be replicated on all 4 machines.
If you plug in the USB display adapter directly or via a powered USB hub, the computer BSODs again. The Computer will get in a loop of BSOD and reboot until you unplug the Display Adapter. Once unplugged the computer boots and works just fine. If you plug it in again it will BSOD in a few seconds before any of the external screens light up.

No other external items are plugged in to the computers. all available updates have been applied to all machines.

I have tried upgrading the DisplayLink software, currently using v8.5.3365.0. I have ran the DisplayLink install cleaner and then reinstalled the DisplayLink software. Running DisplayLink Windows Support Tool 1.0.0.28 shows no errors.
nordiccamel is offline   Reply With Quote
Old 05-15-2018, 02:00 PM   #2
Scandinavica
Junior Member
 
Join Date: May 2018
Posts: 2
Default Problems with win10 1803 update

Quote:
Originally Posted by nordiccamel View Post
I have 4 different models of computers that have be updated to Windows 1803. All of them are experiencing the same issues with our DisplayLink USB display adapters.

Surface 4 Pro
Surface 3 Pro
HP EliteBook x360 1030 G2
HP Probook 650 G1

As soon as they finished the 1803 upgrade and rebooted they BSOD'd. The message is PNP_Detected_Fatal_Error. If you unplug the Display Link adapter, the computer boots fine.

The issue can be replicated on all 4 machines.
If you plug in the USB display adapter directly or via a powered USB hub, the computer BSODs again. The Computer will get in a loop of BSOD and reboot until you unplug the Display Adapter. Once unplugged the computer boots and works just fine. If you plug it in again it will BSOD in a few seconds before any of the external screens light up.

No other external items are plugged in to the computers. all available updates have been applied to all machines.

I have tried upgrading the DisplayLink software, currently using v8.5.3365.0. I have ran the DisplayLink install cleaner and then reinstalled the DisplayLink software. Running DisplayLink Windows Support Tool 1.0.0.28 shows no errors.

I have the exact same problem on a DELL Lat e7250
Scandinavica is offline   Reply With Quote
Old 05-16-2018, 09:01 AM   #3
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
Arrow

Hello,

This will need to be addressed by Microsoft as out driver doesn't have the capability to generate BSoDs.
They will need the memory dump to investigate this.

If you go in system advanced settings and do generate full memory dump, then create the issue, you will get a MEMORY.DMP file.
Please compress this file and share it with us via the cloud storage provider of your choice so we can create a bug report to Microsoft.

We have had one report via ticket with the file so I've already got the bug creation listed, but having more files would help.

Kind regards,
Alban

Ref 27809 - PNP_DETECTED_FATAL_ERROR BSOD on RS4 (connection or loop at boot)
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Old 05-17-2018, 09:53 AM   #4
PavelN
Junior Member
 
Join Date: May 2018
Posts: 1
Default Blue screen

Hello,
I have 4 notebooks and after the latest Windows 10 update, they are not able to work when connected to the Toshiba Dynadock. When I disconnect the dynadock the notebooks work without problems. I tried to install latest "8.5 M0 17 Apr 2018" software and drivers but it still does not work. I tried completely uninstall the display link software then connect the Dynadock. When there is no display link software (drivers) installed notebooks work. But when I install display link software and windows starts to detect and install drivers it falls down to the blue screen with the error "PNP detected fatal error." Is there any solution? Thank you for your help

Pavel N.
PavelN is offline   Reply With Quote
Old 05-17-2018, 01:17 PM   #5
ITNewb
Junior Member
 
Join Date: May 2018
Location: Cambridgeshire, UK
Posts: 2
Default Same Here - confirmed on two different docks.

Hi
I'm having the same BSOD, PNP error started this morning, Preparing a full memory .dmp file now after I had made sure I was running the latest 8.5 MO update, and the issue was still there.

I did, it is.
ITNewb is offline   Reply With Quote
Old 05-17-2018, 01:25 PM   #6
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
Arrow

Thanks a lot ITWebn,
I recommend you don't waste your time changing the driver for now. 8.5 M1 won't create or prevent the BSoD either.

We are lucky there are multiple reports. This will help us get higher priority!

Kind regards,
Alban
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Old 05-17-2018, 02:57 PM   #7
ITNewb
Junior Member
 
Join Date: May 2018
Location: Cambridgeshire, UK
Posts: 2
Default

https://drive.google.com/open?id=

Minidump file in link, full memory dump came in over 6GB, I hope this helps.

Last edited by AlbanRampon; 05-17-2018 at 03:12 PM. Reason: Alban removed the link
ITNewb is offline   Reply With Quote
Old 05-17-2018, 03:17 PM   #8
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
Arrow

Quote:
Originally Posted by ITNewb View Post
https://drive.google.com/open?id=

Minidump file in link, full memory dump came in over 6GB, I hope this helps.
Alright, so looking at 051718-14578-01.dmp
The crash is from the kernel graphics driver. (IMAGE_NAME: IndirectKmd.sys)
But there's someone interfering with it.
Cylance Protector filter driver is intercepting the calls (CyProtectDrv64).
Would you have the leisure to try and repro without that utility filtering the Windows graphics driver? That should be the first question Microsoft would ask me!

Kind regards,
Alban



2: kd> kc
# Call Site
00 nt!KeBugCheckEx
01 nt!IoSetDevicePropertyData
02 dxgkrnl!DXGMONITOR::_UpdatePnPDeviceProperties
03 dxgkrnl!DXGMONITOR::_OnMonitorDeviceNodeReady
04 dxgkrnl!MonitorNotifyDeviceNodeReady
05 dxgkrnl!DpiPdoHandleQueryId
06 dxgkrnl!DpiPdoDispatchPnp
07 dxgkrnl!DpiDispatchPnp
08 nt!IofCallDriver
09 CyProtectDrv64
0a 0x0
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Old 05-17-2018, 03:29 PM   #9
AlbanRampon
Senior Member
 
AlbanRampon's Avatar
 
Join Date: Sep 2015
Location: Cambridge, UK
Posts: 1,678
Arrow

Receive a full memory dump through ticket.
Same driver filtering the OS graphics.


1: kd> kc
# Call Site
00 nt!KeBugCheckEx
01 nt!IoSetDevicePropertyData
02 dxgkrnl!DXGMONITOR::_UpdatePnPDeviceProperties
03 dxgkrnl!DXGMONITOR::_OnMonitorDeviceNodeReady
04 dxgkrnl!MonitorNotifyDeviceNodeReady
05 dxgkrnl!DpiPdoHandleQueryId
06 dxgkrnl!DpiPdoDispatchPnp
07 dxgkrnl!DpiDispatchPnp
08 nt!IofCallDriver
09 CyProtectDrv64
0a CyProtectDrv64
0b CyProtectDrv64
0c CyDevFlt64
0d CyDevFlt64
0e nt!IofCallDriver
0f WUDFRd!RdPnpTracker::RdPnpProcessor
10 WUDFRd!RdPnpTracker::RdPnpProcessor
11 WUDFRd!RdPnpTracker::RdPnpProcessor
12 WUDFRd!RdPnpTracker::RdPnpProcessor
13 WUDFRd!RdPnpTracker::RdPnp
14 WUDFRd!RdFdoDevice::RdPnp
15 WUDFRd!RdDevice::ProcessIrp
16 WUDFRd!RdDriver::RdDispatch
17 nt!IofCallDriver
18 dxgkrnl!DpiFdoHandleQueryDeviceRelations
19 dxgkrnl!DpiFdoDispatchPnp
1a dxgkrnl!DpiDispatchPnp
1b nt!IofCallDriver
1c nt!PnpAsynchronousCall
1d nt!PnpSendIrp
1e nt!PnpQueryDeviceRelations
1f nt!PipEnumerateDevice
20 nt!PipProcessDevNodeTree
21 nt!PiProcessReenumeration
22 nt!PnpDeviceActionWorker
23 nt!ExpWorkerThread
24 nt!PspSystemThreadStartup
25 nt!KiStartSystemThread
__________________
Alban Rampon
Senior product manager, universal docking stations and accessories
"DisplayLink is proud to be a Synaptics brand."

Where to download the latest DisplayLink drivers
How to clean up a corrupted installation
How to report issues to DisplayLink for a speedy resolution
AlbanRampon is offline   Reply With Quote
Old 05-17-2018, 06:20 PM   #10
nordiccamel
Junior Member
 
Join Date: May 2018
Posts: 5
Default

I sent in two dumps via email. I also have CylanceProtect installed. I sent in one dump with Cylance running. and one dump after stopping the Cylance services.
nordiccamel is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.