5.3b2 woes on intel 650 system

dmlb · 04-02-2010, 09:29 PM

Hello

At have I have two PCs: Dell Studio XPS 1340 laptop (Nvidia G9500) and a newer home built HTPC with Asus P7H55 EVO, using an Core i5-650 with on board GFX. Displays are laptop screen, Sony Bravia over HDMI for the HTPC, LG206WU over displaylink, and mino UM-740 over displaylink. Both machines run Win 7x64.

I've got 5.3b2 on both machines. Btw the date and driver version do not match the numbers on your sticky post, I get 24/2/2010, and 5.3.23615, as in the .inf file in the DisplayLink 5.3b2.zip file:
DriverVer=02/24/2010,5.3.23615.0

On the Dell laptop using either one or both of the display link monitors works like a charm.

On the HTPC it's not good. The LG206WU is fine, but the Mimo device doesn't work. It is detected, but when ever I try and extend the desktop to it, all I get is a blank screen. Even with the primary display set to the HDMI output, the desktop gets moved to the UM-740 but nothing is displayed.

Will follow up this post with the debugging tool output.

Duncan

04-02-2010, 09:29 PM	#1
dmlb Junior Member Join Date: Mar 2010 Posts: 7	5.3b2 woes on intel 650 system Hello At have I have two PCs: Dell Studio XPS 1340 laptop (Nvidia G9500) and a newer home built HTPC with Asus P7H55 EVO, using an Core i5-650 with on board GFX. Displays are laptop screen, Sony Bravia over HDMI for the HTPC, LG206WU over displaylink, and mino UM-740 over displaylink. Both machines run Win 7x64. I've got 5.3b2 on both machines. Btw the date and driver version do not match the numbers on your sticky post, I get 24/2/2010, and 5.3.23615, as in the .inf file in the DisplayLink 5.3b2.zip file: DriverVer=02/24/2010,5.3.23615.0 On the Dell laptop using either one or both of the display link monitors works like a charm. On the HTPC it's not good. The LG206WU is fine, but the Mimo device doesn't work. It is detected, but when ever I try and extend the desktop to it, all I get is a blank screen. Even with the primary display set to the HDMI output, the desktop gets moved to the UM-740 but nothing is displayed. Will follow up this post with the debugging tool output. Duncan