10-13-2013, 02:38 PM | #1 |
Junior Member
Join Date: Oct 2013
Posts: 4
|
after 10/8 Win7 update BVU195 inoperative
On 10/8/13 the attached windows updates occured. see attached: updates on 10_8
Since then, I am unable to use my Diamond BVU195, which up until then was working correctly. System: Intel i7 3400 3.4 GHz 16 GB Ram Windows 7 Home Prem sp 1 64 bit connect BVU195 directly via usb port, no hub used. Running the latest version of your drivers, gives the message attached as it fails. De install and install of two previous vers. now give errors. see attached display link issue image Running thru your debug check list gives an indication the devices did not install properly. attached pf adapter properties. see display link issue image 3 my USB 3 controller driver is current and my AMD 6950 drivers are current.. I own three bvu195(s), used all three simulataneously in past on this machine without issue. But 6 mo ago, removed two, using only one....again flawless until the Windows updates. One thing I notice. After install of the two latest driver versions, my pc was being interrupted repeatedly as I typed the above events in a text message, loosing focus and having to select the doc or page to continue typing. Also, I would get interrupted in my browser when typing in a url or my id and password in your forum. To the point my incorrect password locked me out of your forum for 15 minutes. I removed the driver and the interrupt issue went away, page focus became normal. Also to verify Windows had not hosed the hardware, I installed each on my MacBook Pro and they worked without issue after installing the latest mac drivers. Last edited by Carolina_Blue; 10-13-2013 at 11:15 PM. |
10-13-2013, 07:06 PM | #2 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Can you attach the information gathered from this support tool? http://www.displaylink.com/support/ticket.php?id=269 Thanks, James |
10-13-2013, 11:16 PM | #3 |
Junior Member
Join Date: Oct 2013
Posts: 4
|
Hi James,
Thanks for looking at this. I have attached the files per your request. |
10-16-2013, 03:22 PM | #4 |
Junior Member
Join Date: Oct 2013
Posts: 4
|
|
10-20-2013, 09:42 PM | #5 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
From looking at the logs the DisplayLink software is not installed. You can get the latest version from here: http://www.displaylink.com/support/downloads.php Thanks, James |
10-20-2013, 09:49 PM | #6 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Sorry, having read your original post I see you have tried installing the DisplayLink software already. The installer logs tell me that the drivers will be installed when the adapter is plugged in. As the adapter hasn't been detected there are unfortunately no DisplayLink logs in the support files. I can't make out what your attachments say. Can you reply with notes of the error messages? Is there a mention of a PID_8060? Thanks, James Last edited by JamesH; 10-20-2013 at 09:52 PM. |
10-26-2013, 11:47 AM | #7 |
Junior Member
Join Date: Oct 2013
Posts: 4
|
James, sorry for the delay in response. I have had to ditch the use of the BVU195. I went ahead and purchased a second graphics card. Picked up an additional three monitor ports with no add drivers on the pc.
thanks for looking at this. I am certain the Win7 update caused my issue. God I bet keeping up with that companies actions is a real treat. I bet one cringes after each update release by MSFT. I do! |
Thread Tools | Search this Thread |
Display Modes | |
|
|