DisplayLink issues since macOS 15.3.2 Update - Page 4

marcus.thiel@gmx.de · 05-03-2025, 09:17 PM

Quote:

Originally Posted by mjaroch

Hello pp.amorim,

Please wait patiently for a response from our engineering team.

My Satechi Videohub is still doing nothing .... and no answer until now from the engineering team ???

keit · 05-06-2025, 08:17 AM

In my case, the problem was successfully resolved by following these steps.
My setup is as follows:

Display <-> Display Adapter <-> USB Adapter <-> Mac

When I reconnected the "Display <-> Display Adapter" connection, a security alert was displayed. By granting the necessary permissions, I was able to resolve the issue.

Although I had previously granted permissions for screen recording and system audio capture, the display was not shown. And no alert appeared when reconnecting either the "Display Adapter <-> USB Adapter" or the "USB Adapter <-> Mac" connections. The alert only appeared when reconnecting the "Display <-> Display Adapter" connection.

Ollewest · 05-21-2025, 03:14 PM

Just bought a Prokord PD-TBT4100WPD and installed latest DisplayLink Manager 1.12.2
I'm on a Mac Mini M4 Mac running OS 15.5
DisplayLink Manager keeps telling me to Please connect your DisplayLink device. Checked that Screen recording is enabled in Security settings.Also added DisplayLink Manager under Security/Accessibility and enabled if that would be needed. I really can't get this working. I see people getting the same issues since 15.3.2 so I suppose my problem is the same. Any idea?

mjaroch · 05-22-2025, 07:36 AM

Hello Ollewest,

I recommend using DisplayLink End-User Cleaner Tool and reinstalling our driver again.
You can do it by following the steps here: https://support.displaylink.com/know...tool-for-macos.

If this doesn't solve your issue, please contact our support directly.

Szymon · 05-23-2025, 12:26 PM

Quote:

Originally Posted by Ollewest

Just bought a Prokord PD-TBT4100WPD and installed latest DisplayLink Manager 1.12.2

Hi Ollewest,

Your device is not a DisplayLink product which is why DisplayLink Manager doesn't recognise it. Unfortunately, we are unable to help. I recommend contacting the device manufacturer directly.

Regards,
Szymon

marcus.thiel@gmx.de · 05-25-2025, 01:53 PM

Quote:

Originally Posted by marcus.thiel@gmx.de

My Satechi Videohub is still doing nothing .... and no answer until now from the engineering team ???

Sequoia 15.05, still not working. satoshi tells me it is a DisplayLink Problem. I cleaned and reinstalled several times, still Display link is not recognizing the Sateshi hub, but it asks the nimble connecting and also charges, but still no other function. im more then slightly pissed at the moment. is there anything else I can do. or is there anything I can try ???

displaylinkfcc · 05-26-2025, 12:25 AM

After upgrading to Sequoia 15.5 from Ventura, Displaylink completely broke. I have taken the steps of uninstalling displaylink using DL's cleaning tool and reinstalling DL.

The displays do come back, however once I shut down the Mac it loses the connection and I have to uninstall DL,reboot and reinstall DL to get the display to come back again.

I did not have this problem with Ventura.

I use a Startech adapter directly connected via USB to one of the USB A ports on the Mac Mini M1.

I've checked the Screen Recording for permissions. I'm not sure what else to check. I'm using version 1.12 (the latest release) of the displaylink manager.

The screen I'm looking for in ProPresenter is missing even when I readd the display during the reinstall but that part seems to work anyway. I'm just annoyed that I have to uninstall and reinstall displaylink every time I boot up to get it to work.

apue · 05-26-2025, 04:46 AM

Quote:

Originally Posted by keit

In my case, the problem was successfully resolved by following these steps.
My setup is as follows:

Display <-> Display Adapter <-> USB Adapter <-> Mac

When I reconnected the "Display <-> Display Adapter" connection, a security alert was displayed. By granting the necessary permissions, I was able to resolve the issue.

Although I had previously granted permissions for screen recording and system audio capture, the display was not shown. And no alert appeared when reconnecting either the "Display Adapter <-> USB Adapter" or the "USB Adapter <-> Mac" connections. The alert only appeared when reconnecting the "Display <-> Display Adapter" connection.

The problem is I don't see the alert notification often.
From today, my 2 monitors stopped showing. I was able to see them this morning but it does NOT work after I shut down my macbook.
Seriously, this problem has been raised by many for many weeks.
I CANNOT believe the engineers don't bring the solutio yet.

marcus.thiel@gmx.de · 05-28-2025, 07:16 PM

and also it is quite a shame that there is simply NO information on the side of DisplayLink ...

smithgcovert2 · 05-29-2025, 03:52 PM

Every now and then - usually after each MacOS 15 update, I re-run the DisplayLink delete tool, and then reinstall the drivers, and hope beyond hope that maybe its been fixed this time.

But it hasn't been. Its still completely unstable. Its infuriating to try to use, so I've just disabled the check box for enabling the display. (So that's nice, the latest drivers make it much easier to disable / re-enable to try. yay, I guess?)

I hate there are no solution and no admission that there's a problem.

Its approaching the longest amount of time that everything has been broken since I first started using DisplayLink adapters 11 years ago.

05-21-2025, 03:14 PM	#33
Ollewest Junior Member Join Date: May 2025 Posts: 1	DisplayLink doesn't work at all for me Just bought a Prokord PD-TBT4100WPD and installed latest DisplayLink Manager 1.12.2 I'm on a Mac Mini M4 Mac running OS 15.5 DisplayLink Manager keeps telling me to Please connect your DisplayLink device. Checked that Screen recording is enabled in Security settings.Also added DisplayLink Manager under Security/Accessibility and enabled if that would be needed. I really can't get this working. I see people getting the same issues since 15.3.2 so I suppose my problem is the same. Any idea?

05-22-2025, 07:36 AM	#34
mjaroch DisplayLink Team Join Date: Mar 2025 Posts: 112	Hello Ollewest, I recommend using DisplayLink End-User Cleaner Tool and reinstalling our driver again. You can do it by following the steps here: https://support.displaylink.com/know...tool-for-macos. If this doesn't solve your issue, please contact our support directly. __________________ Marta Jaroch DisplayLink Team Where to download the latest DisplayLink drivers How to report macOS issues to DisplayLink tech support for a speedy resolution

05-26-2025, 12:25 AM	#37
displaylinkfcc Junior Member Join Date: May 2025 Posts: 1	Sequoia broke Displaylink - annoying workaround After upgrading to Sequoia 15.5 from Ventura, Displaylink completely broke. I have taken the steps of uninstalling displaylink using DL's cleaning tool and reinstalling DL. The displays do come back, however once I shut down the Mac it loses the connection and I have to uninstall DL,reboot and reinstall DL to get the display to come back again. I did not have this problem with Ventura. I use a Startech adapter directly connected via USB to one of the USB A ports on the Mac Mini M1. I've checked the Screen Recording for permissions. I'm not sure what else to check. I'm using version 1.12 (the latest release) of the displaylink manager. The screen I'm looking for in ProPresenter is missing even when I readd the display during the reinstall but that part seems to work anyway. I'm just annoyed that I have to uninstall and reinstall displaylink every time I boot up to get it to work.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-06-2025, 08:17 AM	#32
keit Junior Member Join Date: May 2025 Posts: 1	In my case, the problem was successfully resolved by following these steps. My setup is as follows: Display <-> Display Adapter <-> USB Adapter <-> Mac When I reconnected the "Display <-> Display Adapter" connection, a security alert was displayed. By granting the necessary permissions, I was able to resolve the issue. Although I had previously granted permissions for screen recording and system audio capture, the display was not shown. And no alert appeared when reconnecting either the "Display Adapter <-> USB Adapter" or the "USB Adapter <-> Mac" connections. The alert only appeared when reconnecting the "Display <-> Display Adapter" connection.

05-28-2025, 07:16 PM	#39
marcus.thiel@gmx.de Junior Member Join Date: Apr 2025 Posts: 6	and also it is quite a shame that there is simply NO information on the side of DisplayLink ...

05-29-2025, 03:52 PM	#40
smithgcovert2 Junior Member Join Date: May 2014 Posts: 17	Every now and then - usually after each MacOS 15 update, I re-run the DisplayLink delete tool, and then reinstall the drivers, and hope beyond hope that maybe its been fixed this time. But it hasn't been. Its still completely unstable. Its infuriating to try to use, so I've just disabled the check box for enabling the display. (So that's nice, the latest drivers make it much easier to disable / re-enable to try. yay, I guess?) I hate there are no solution and no admission that there's a problem. Its approaching the longest amount of time that everything has been broken since I first started using DisplayLink adapters 11 years ago.