Build 10166 and v7.9 RC

TMCFan · 07-14-2015, 08:07 PM

Hi All,

I noticed the 7.9 RC today, and having installed it my perception is that there's been another set of improvements (e.g., reduced display lag and overall sluggishness when mousing).

Happy with this build so far, although for users like me who've upgraded tablet devices, I still feel the acid test will come when it's possible to do a completely clean install.

Best wishes to the DisplayLink team in finalising the initial mainstream/production release.

----------
- Windows Home 10 build 10166
- Dell Venue 8 Pro (5830)
- Plugable UD-Pro8 updated with DisplayLink driver 7.9.296.0 (07-Jul-2015), and Plugable Ethernet adapter with driver 7.9.260.0 (19-Jun-2015)
- Plugable UD-3900 updated with DisplayLink driver 7.9.296.0
- Plugable UGA-4KDP updated with DisplayLink driver 7.9.296.0
- AOC Q2770P connected via DisplayPort
- Dell U2312HM connected via DisplayPort
- Corsair Vengeance 1500 headset connected via Plugable USB hub, with audio finally working properly(!)

MarkDS · 07-14-2015, 08:55 PM

Thanks for the heads up. Going to boot over to 10166 now and give it a try.

Just went into 10166 and gave it a try. No Go for me. Still getting :

Device USB\VID_17E9&PID_0053\0053-100043 requires further installation. And causes the 4 Display Port moniutors to flash off and on with screen.

Win 10 10166
Asus X99 MB 16 gb DDR4
2 AMC FirePro 2100 Display Ports

DisplayLink driver 7.9.296.0 (07-Jul-2015), no go with GUC2020DW6 USB - HDMI and iClever (using displaylink chip)USB - DVI

USER101 · 07-16-2015, 04:00 AM

Has anyone tested Display link 7.9 RC with the AMD Catalyst™ Display Driver version 15.20.1046 installed?

dbaw · 07-16-2015, 10:09 AM

RC installer still doesn't work. Not with (RTM) build 10240, at least:

(no relevant events in eventviewer)

07-14-2015, 08:07 PM	#1
TMCFan Junior Member Join Date: May 2015 Posts: 4	Build 10166 and v7.9 RC Hi All, I noticed the 7.9 RC today, and having installed it my perception is that there's been another set of improvements (e.g., reduced display lag and overall sluggishness when mousing). Happy with this build so far, although for users like me who've upgraded tablet devices, I still feel the acid test will come when it's possible to do a completely clean install. Best wishes to the DisplayLink team in finalising the initial mainstream/production release. ---------- - Windows Home 10 build 10166 - Dell Venue 8 Pro (5830) - Plugable UD-Pro8 updated with DisplayLink driver 7.9.296.0 (07-Jul-2015), and Plugable Ethernet adapter with driver 7.9.260.0 (19-Jun-2015) - Plugable UD-3900 updated with DisplayLink driver 7.9.296.0 - Plugable UGA-4KDP updated with DisplayLink driver 7.9.296.0 - AOC Q2770P connected via DisplayPort - Dell U2312HM connected via DisplayPort - Corsair Vengeance 1500 headset connected via Plugable USB hub, with audio finally working properly(!)

07-14-2015, 08:55 PM	#2
MarkDS Junior Member Join Date: Jul 2015 Posts: 8	Thanks for the heads up. Going to boot over to 10166 now and give it a try. Just went into 10166 and gave it a try. No Go for me. Still getting : Device USB\VID_17E9&PID_0053\0053-100043 requires further installation. And causes the 4 Display Port moniutors to flash off and on with screen. Win 10 10166 Asus X99 MB 16 gb DDR4 2 AMC FirePro 2100 Display Ports DisplayLink driver 7.9.296.0 (07-Jul-2015), no go with GUC2020DW6 USB - HDMI and iClever (using displaylink chip)USB - DVI Last edited by MarkDS; 07-14-2015 at 09:27 PM.

07-16-2015, 04:00 AM	#3
USER101 Junior Member Join Date: Jul 2015 Posts: 5	Has anyone tested Display link 7.9 RC with the AMD Catalyst™ Display Driver version 15.20.1046 installed?

07-16-2015, 10:09 AM	#4
dbaw Junior Member Join Date: Jul 2015 Posts: 2	RC installer still doesn't work. Not with (RTM) build 10240, at least: (no relevant events in eventviewer)