Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-12-2021, 08:42 AM   #1
davss
Junior Member
 
Join Date: Nov 2020
Posts: 18
Default Does DL driver work with macOS latest update

UPDATE

Just updated my macOS to 11.4 with DL 1.4 installed and all is working well on my 3 x 2K monitors via DL driver apart from missing screen rotation options in Preferences > Displays for my DL monitors hence couldn't test it. However, one user reported no HiDPI above resolution 1920x1080 as below:

Reported by tommiy
Join Date: Mar 2018
Posts: 56
Default
Low res 4k is available but other than that no other HiDPI resolutions above 1920x1080.

Full details and configuration here:
https://displaylink.org/forum/showth...1831#post91831

Many thanks,
David

Last edited by davss; 06-06-2021 at 07:08 AM.
davss is offline   Reply With Quote
Old 02-13-2021, 03:54 PM   #2
ameeno1
Junior Member
 
Join Date: Jan 2021
Posts: 3
Default

I want to know too as I have had an update notification and will hold off updating till this q is answered.
ameeno1 is offline   Reply With Quote
Old 02-14-2021, 04:29 AM   #3
anthlover
Junior Member
 
Join Date: Dec 2020
Posts: 25
Default

11.2.1 seems to be fine with Displaylink 1.2
anthlover is offline   Reply With Quote
Old 02-16-2021, 11:04 AM   #4
davss
Junior Member
 
Join Date: Nov 2020
Posts: 18
Default

I can confirm DLM 1.3.0 (Build 56.111) M1 native is working fine on macOS 11.2.1 (20D74) on MacBook Air 2020 M1.

The screen rotation still hasn't been fixed.
davss is offline   Reply With Quote
Old 02-16-2021, 08:51 PM   #5
geffsta
Junior Member
 
Join Date: Apr 2018
Posts: 6
Default

I'm using Big Sur Beta 11.3. New driver is not working with this OS. I have a MacBook Pro and an Acer monitor. All was fine before I installed the new 1.3 driver. Tried going back to 1.2 driver and still no display on my Acer.
geffsta is offline   Reply With Quote
Old 03-22-2021, 04:35 PM   #6
davss
Junior Member
 
Join Date: Nov 2020
Posts: 18
Default

I'm currently on macOS 11.2.3 (20D91) and DL driver 1.3 using the following monitors:

3 x Dell U2515H via DL drivers and StarTech USB 3.0 to DisplayPort External Video Card Adapter 2560x1600 USB32DPPRO hardware
1 x Dell U4919DW via provided by Dell bi-directional USB-C cable (it's the only allowed native external display up to 6K and is charging my MB Air M1 2020 at the same time even when turn off the monitor - there's settting in the monitor that allows it / sort of power pass-though).

The above setup is still working fine and only very occasional wake up from sleep problems.

Cheers,
David

ps. thanks for confirming Beta problms - will avoid updates until confirmed working by others.

Last edited by davss; 03-22-2021 at 04:37 PM.
davss is offline   Reply With Quote
Old 03-26-2021, 02:09 AM   #7
geffsta
Junior Member
 
Join Date: Apr 2018
Posts: 6
Default

Latest update to Big Sur beta on March 24th and again, not working with Acer Monitor on my MacBook Pro.
geffsta is offline   Reply With Quote
Old 04-26-2021, 08:39 PM   #8
davss
Junior Member
 
Join Date: Nov 2020
Posts: 18
Default

Can anyone confirm current DL driver works fine on M1 on macOS Big Sur 11.3 11.3 before I press Install Now button?

Cheers,
David
davss is offline   Reply With Quote
Old 04-27-2021, 02:37 AM   #9
BHedges
Junior Member
 
Join Date: Apr 2021
Posts: 3
Default

I installed Big Sur 11.3 on MBpro M1 and now DL only allows 1920x1080 on an LG 4K screen So I'd say no. Annoying as its been in Beta for ages, no warnings from DL...

Last edited by BHedges; 04-27-2021 at 02:40 AM. Reason: addition
BHedges is offline   Reply With Quote
Old 04-27-2021, 06:42 PM   #10
pjl
Junior Member
 
Join Date: Apr 2021
Posts: 5
Default

I confirm the following configuration works including clamshell mode. I have three monitors - 2 x 24" 1080p via D6000, 1 x 32" 1440p via Anker USB C hub

MacBook Ar (M1, 2020)
Big Sur 11.3
DisplayLink Manager 1.3.0 (build 56.111)
Anker USB C Hub, PowerExpand 8-in-1
Dell D6000

Below is how I connect them together.

MacBook Air =(via TB4 port)=> Anker with PD adapter, 1 x 1440p monitor, ethernet =(via USB C data port)=> D6000 with 2 x 1080p monitors

I hope this helps.

Last edited by pjl; 04-27-2021 at 06:44 PM.
pjl is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.