Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-17-2023, 09:11 PM   #1
bobharpista
Junior Member
 
Join Date: May 2023
Posts: 1
Default Only allows 1 display after 13.3.1 update

I've been using two displays on my macbook air M2. However, after I updated to Ventura 13.3.1 only one of my displays is working.

I have updated my display link software to 1.8.1, rebooted the computer, and ensured the display link has permission to record the screen. None of which had any effect.

Any ideas on what I need to do to get both external displays working again?
bobharpista is offline   Reply With Quote
Old 05-21-2023, 02:43 AM   #2
krit86lr
Junior Member
 
Join Date: May 2023
Posts: 2
Default

Hello,

This has happened to me a few times after updates. I also have a M2 chip. Each time I had to complete uninstall Display Link, and reboot. Then reinstall the software. Hopefully this works for you too!

Now I keep a copy of the installation file in a safe spot for easy access when I need it.

Good luck!
krit86lr is offline   Reply With Quote
Old 05-21-2023, 08:04 AM   #3
tiwitwo
Junior Member
 
Join Date: May 2023
Posts: 1
Default I also have this problem

I also have this problem on an intel MBP running Ventura 13.3.1

If anybody knows how to fix this would greatly appreciate it!
tiwitwo is offline   Reply With Quote
Old 05-23-2023, 12:59 PM   #4
KatarzynaCzaja
DisplayLink Tech Support
 
KatarzynaCzaja's Avatar
 
Join Date: Apr 2020
Posts: 461
Default

Hello,

If you are having issues after updating to a higher version of the OS please make sure to check if the docking station/video adapter is detected under the USB bus. For instructions check:
My DisplayLink device does not work at all when connecting on macOS X

If the device is not detected, please powercycle the docking station. So unplug it from the computer and power for 15-30 seconds and re-plug power and the USB cable. Test if it is working.
KatarzynaCzaja is offline   Reply With Quote
Old 05-24-2023, 03:26 PM   #5
rafiqg
Junior Member
 
Join Date: May 2023
Posts: 1
Default Only 1 Display Works after 13.3.1 (a) Update

I am having the same issue - after the update, only the first display works. I have updated my drivers and my docking station is also being detected by my Mac. I have a MacBook Pro with an M1 chip.
rafiqg is offline   Reply With Quote
Old 05-25-2023, 04:15 AM   #6
Rez
Junior Member
 
Join Date: May 2023
Posts: 1
Default Same issue

I also am experiencing the same issue the only one HDMI port on my dock properly works after update 13.3.1. Currently on 13.4. m1 mba
Rez is offline   Reply With Quote
Old 05-25-2023, 07:19 AM   #7
shidoh
Junior Member
 
Join Date: May 2023
Posts: 7
Default Same issue

Same problem. D6000, M1 Pro. After updating to 13.3.1 and further to 13.4, an external monitor connected via hdmi stopped working. Version 1.8.1, firmware A04
Clean OS, first install displaylink (laptop just issued by employer)

upd: only one monitor (hdmi) connected, no other devices or monitors are connected to the docking station

Last edited by shidoh; 05-26-2023 at 06:15 AM.
shidoh is offline   Reply With Quote
Old 05-26-2023, 05:28 PM   #8
jakeave
Junior Member
 
Join Date: May 2023
Posts: 1
Default Double check the refresh rate

I was having a similar issue, and in the System Setting > Displays, I saw that both of my monitors were being detected, but only one was working. It turns out that when I updated my computer, it reset the Refresh rates to 75hz, but my docking station only supports 60hz via USB. So changing my second monitor to 60hz fixed the issue immediately.
jakeave is offline   Reply With Quote
Old 05-27-2023, 06:10 PM   #9
cokeefe
Junior Member
 
Join Date: May 2023
Posts: 1
Default 1 display only

I just bought the doc, am running Ventura 13.4 and all newly installed software, and it only recognizes a single display from my MacBook Air M2. Very frustrating.
cokeefe is offline   Reply With Quote
Reply

Tags
13.3.1, 2nd display not working, macbook update

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.