Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Windows Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-23-2013, 12:29 AM   #1
eightman8
Junior Member
 
Join Date: Mar 2013
Posts: 2
Default No errors...But display is blank

I have this issue with a usb monitor (and Dynadock 3.0).
I believe the problem is the same. I'll just make my concern about the monitor.
I have been able to test the monitor on other systems.

My test subjects -
Sony laptop / Windows 7 / 64bit - Works perfect
Asus tablet / Windows 8 / 64bit - Works perfect
*Asus laptop / Windows 8 / 64bit - Problem!

The problem is that the monitor has power but does not show an image.
Computer reports no errors. The computer recognizes it and it shows up as an additional monitor in display control panel.
The cursor evens goes off screen as if it's on the monitor.

Here are the differences between the two Asus computers.
Laptop only has Usb 3.0. Also their are two display adapters on the Laptop
Intel HD 4000, Nvidia GT 650M.

I have installed and reinstalled, a few time, all the most recent drivers for both the display adapters and the displaylink.

Tired. Please Help. Any advice would be greatly appreciated.
eightman8 is offline   Reply With Quote
Old 03-23-2013, 04:35 PM   #2
Just Me
Junior Member
 
Join Date: Mar 2013
Posts: 13
Default Try forcing the problem monitor

Try forcing the problem monitor to use the NVidia graphics card. A quick test would be to disable the Intel graphics via display manager.
Just Me is offline   Reply With Quote
Old 03-25-2013, 01:54 AM   #3
eightman8
Junior Member
 
Join Date: Mar 2013
Posts: 2
Default Wow - Thank You - Solved - No Wait!!

(revised)

Okay. That worked in like seconds. Monitor image popped right on. Awesome.
Disabling the display adapter did cause problems.
When I restarted the laptop screen was blank. I had to plug the usb monitor in to re-enable the Intel adapter.
Which made the laptop screen work… and the usb monitor not-work.
Also, some programs didn’t work correctly.
Video playback was irregular, sometimes it was fine. Strange.

So… the only way to get the monitor to work is to…
Boot the laptop with both adapters enabled.
Then disable the Intel adapter.
Work with both monitors, but with fickle performance.
Then remember to re-enable the Intel adapter before shut down.
*Repeat process every time you want to use the monitor.

Thanks 'Just Me'. I do think you nailed the problem. It is definitely the dueling display adapters.
But until I can manually choose an adapter for each screen… it’s jury-rigged.
Or unless the intellects at DisplayLink can figure a workaround for us dual adapter losers.

Last edited by eightman8; 03-25-2013 at 01:21 PM.
eightman8 is offline   Reply With Quote
Old 03-25-2013, 03:35 PM   #4
Just Me
Junior Member
 
Join Date: Mar 2013
Posts: 13
Default You can force the adapter

I was able to force my external monitors to run on the NVidia card and the laptop to run on the Intel. Unfortunately, I forgot how I did it.

I ran so many troubleshooting steps trying to fix this that I cannot say for sure. You might try installing new USB drivers from the manufacturer's website. I had to follow these steps to update my USB drivers as Intel does not write any for Windows 8:

http://plugable.com/2012/12/01/windo...st-controllers

I also disabled the following Intel services - hkcmd Module, igfxTray Module, and persistence Module. They were set to auto start but are now set to disabled.

You can download DevManView from nirsoft.net and write a batch file to run at startup to automatically enable the Intel graphics card. At least then if you forget to re-enable it before shutdown, you will be able to use your laptop when you are away from your external monitors.

Last edited by Just Me; 03-25-2013 at 03:40 PM. Reason: Add Windows 8 info
Just Me is offline   Reply With Quote
Old 03-26-2013, 02:11 AM   #5
Just Me
Junior Member
 
Join Date: Mar 2013
Posts: 13
Default Forgot to add

To use DevManView automatically you will have to turn off UAC. There is a way to turn it off for one application only. Microsoft released a KB on how to do it and then withdrew it. This page goes over the details:

http://www.wintuts.com/Disable-UAC-f...n-applications

I have not tried it. There is also an application that turns off UAC for selected applications called UAC Trust Shortcut. I have not used it either.
Just Me is offline   Reply With Quote
Reply

Tags
black, blank, has power, no image

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.