|
|
Thread Tools | Search this Thread | Display Modes |
07-23-2014, 01:04 AM | #1 |
Junior Member
Join Date: Jul 2014
Posts: 3
|
Slow Network Performance - Targus Universal USB 3.0 DV Docking Station with Power
How often does the issue occur? The issue occurs during any internet function performed - web browsing, remote desktop, etc. I am not using ethernet. This is the wifi card.
How do you invoke the issue? If I plug the docking station via the USB 3.0 port, the network starts to lag immensely. Websites visibly take a long time to load. How do you recover from the issue? I unplug the docking station. Was the issue present in older versions of DisplayLink software? I just received my product in the mail today. How are you connected to the DisplayLink device? Directly or through a USB hub? Directly with the provided USB 3.0 cable. Zip file attached for debugging. Targus model is ACP71USZ. Thanks, Bryan Alfaro Last edited by bpalfaro; 07-23-2014 at 04:13 AM. |
07-29-2014, 08:55 AM | #2 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
As a first step can you check if you are experiencing this issue: http://www.displaylink.com/support/ticket.php?id=340 Thanks, James |
08-12-2014, 09:15 PM | #3 |
Junior Member
Join Date: Jul 2014
Posts: 3
|
James,
Sorry for the late response. I guess I am not setup to receive messages for replies. I do not have a wireless keyboard or mouse. They are both USB. The wireless router resides in a room on the other side of the house at this point. Anything new come along over the last couple of weeks? Thanks, Bryan |
08-13-2014, 03:40 PM | #4 |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
I believe you have the problem that James refers to. The USB 3.0 traffic to the dock is causing interference that your Wifi card is picking up and slowing down the network transfers.
A way to check is to swap from a USB 3.0 cable to a USB 2.0 cable and see if the problem goes away. If it does, then there is USB 3.0 interference coming from your dock. Wim |
08-13-2014, 05:00 PM | #5 |
Junior Member
Join Date: Jul 2014
Posts: 3
|
I do not have a USB 2.0 cable in the box.
So, based on the article James sent, I turned off 2.4ghz on my wireless card and switched to 5ghz only. This seems to work and doesn't have the poor and jumpy network performance. My router is not ideally placed for 5ghz operation which is a different problem to deal with so my wireless strength is poor. I may still be slightly affected by the USB 3.0 connection based on the article. Instead, let me ask this, how would I "shield" the docking station? If my only option is a hardwired cable I am not sure I will keep the product as this is not possible. Thanks, Bryan |
Tags |
network, targus |
|
|