11-07-2017, 07:45 AM | #1 |
Junior Member
Join Date: Oct 2017
Posts: 11
|
17.10 Problems brainstorm
I have an idea, to brainstorm some ideas (possibly with people who have deeper knowledge on EVDI and USB).
I was able to run 3-dsplay setup by editting /etc/default/grub and update line with GRUB_CMDLINE_LINUX_DEFAULT to look like this: Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_iommu=off pcie_port_pm=off acpi_backlight=none acpi_osi=Linux acpi_osi=! acpi_osi=\"Windows 2009\"" Code:
Section "Device" Identifier "Intel Graphics" Driver "Intel" Option "AccelMethod" "sna" Option "TearFree" "false" Option "TripleBuffer" "true" Option "MigrationHeuristic" "greedy" Option "ExaNoComposite" "false" Option "Tiling" "true" Option "Pageflip" "true" Option "Backlight" "intel_backlight" BusID "PCI:0:2:0" EndSection The dmesg output during error is always following: Code:
[wto lis 7 09:13:30 2017] usb 4-1.1: Disable of device-initiated U1 failed. [wto lis 7 09:13:30 2017] usb 4-1.1: Disable of device-initiated U2 failed. [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5 enx9cebe853655a: unregister 'cdc_ncm' usb-0000:3e:00.0-1.1, CDC NCM [wto lis 7 09:13:30 2017] usb 4-1.1: Set SEL for device-initiated U1 failed. [wto lis 7 09:13:30 2017] usb 4-1.1: Set SEL for device-initiated U2 failed. [wto lis 7 09:13:30 2017] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [wto lis 7 09:13:30 2017] usb 4-1.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong. [wto lis 7 09:13:30 2017] usb 4-1.1: [4] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16 [wto lis 7 09:13:30 2017] usb 4-1.1: Warning! Unlikely big volume range (=672), cval->res is probably wrong. [wto lis 7 09:13:30 2017] usb 4-1.1: [7] FU [Dell USB Audio Playback Volume] ch = 6, val = -10752/0/16 [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5: MAC-Address: 9c:eb:e8:53:65:5a [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5: setting rx_max = 16384 [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5: setting tx_max = 16384 [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5 usb0: register 'cdc_ncm' at usb-0000:3e:00.0-1.1, CDC NCM, 9c:eb:e8:53:65:5a[wto lis 7 09:13:33 2017] [drm:drm_wait_vblank [drm[wto lis 7 09:13:33 2017] [drm:drm_wait_vblank [drm]] *ERROR* Unsupported type value 0x4000059, supported mask 0x7400003f ]] *ERROR* Unsupported type value 0x4000059, supported mask 0x7400003f [wto lis 7 09:13:33 2017] [drm:drm_wait_vblank [drm]] *ERROR* Unsupported type value 0x4000059, supported mask 0x7400003f[wto lis 7 09:13:33 2017] [drm:drm_wait_vblank [drm]] *ERROR* Unsupported type value 0x4000059, supported mask 0x7400003f [wto lis 7 09:13:30 2017] usb 4-1.1: usbfs: process 7730 (DeviceWindowDis) did not claim interface 0 before use [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5 enx9cebe853655a: renamed from usb0 [wto lis 7 09:13:30 2017] IPv6: ADDRCONF(NETDEV_UP): enx9cebe853655a: link is not ready [wto lis 7 09:13:30 2017] IPv6: ADDRCONF(NETDEV_UP): enx9cebe853655a: link is not ready [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5 enx9cebe853655a: network connection: disconnected Code:
[wto lis 7 09:12:32 2017] pcieport 0000:00:1d.6: AER: Corrected error received: id=00ee [wto lis 7 09:12:32 2017] pcieport 0000:00:1d.6: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00ee(Transmitter ID) [wto lis 7 09:12:32 2017] pcieport 0000:00:1d.6: device [8086:a11e] error status/mask=00001000/00002000 [wto lis 7 09:12:32 2017] pcieport 0000:00:1d.6: [12] Replay Timer Timeout Code:
[wto lis 7 09:13:33 2017] [drm:drm_wait_vblank [drm]] *ERROR* Unsupported type value 0x4000059, supported mask 0x7400003f My machine_info.txt: Code:
Machine name: tempest OS info: Linux-4.13.0-16-generic-x86_64-with-Ubuntu-17.10-artful CPU info: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Cache: 6144 KB Cores: 4 Installed RAM: 32791956 kB Currently logged user: bjablonski DL driver version: 1.4.210 EVDI kernel module version: 1.5.0 DLM running: False --------------------------------------------------------------- Im most interested in interpretation of following lines: Code:
[wto lis 7 09:13:30 2017] usb 4-1.1: Disable of device-initiated U1 failed. [wto lis 7 09:13:30 2017] usb 4-1.1: Disable of device-initiated U2 failed. [wto lis 7 09:13:30 2017] cdc_ncm 4-1.1:1.5 enx9cebe853655a: unregister 'cdc_ncm' usb-0000:3e:00.0-1.1, CDC NCM [wto lis 7 09:13:30 2017] usb 4-1.1: Set SEL for device-initiated U1 failed. [wto lis 7 09:13:30 2017] usb 4-1.1: Set SEL for device-initiated U2 failed. I hope we can come up with something, because I would really like to use this D6000 station for something more than ultra-expensive USB hub... PS. Why are DLM logs base64 encoded binaries? PS2. Why you guys @ DisplayLink seem not to see this issue? |
Tags |
17.10, brainstorm, linux |
|
|