04-17-2018, 07:54 PM | #1 |
Junior Member
Join Date: Apr 2018
Posts: 2
|
Display Link Android App
I've installed this application on a Samsung Galaxy Tab S3 to record video/screen.
I was able to send the video signal to my TV with no issues, worked great. However, when I plug it into an Avermedia Live Gamer Portable 2 (video capture device) I lose network connectivity and the USB mode changes from USB Media Transfer Protocol to USB Charging. If I force it to MTP the WiFi connects for a bit, then changes back to USB Charging and no longer connects. Any idea of why that is? |
04-24-2018, 12:06 AM | #2 |
Junior Member
Join Date: Apr 2018
Posts: 2
|
displaylink presenter app
So if I force close this app on my android device, wifi begins working immediately. It stops when I start the app. Any ideas of why this might be? I couldn't find an android section, so I am posting here.
Thanks |
05-02-2018, 11:56 AM | #3 |
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
Hi
I have no idea why connecting a different display (which is all the Live Gamer box should look like) is causing the USB port of the phone to change role for the DisplayLink adapter to drop. I assume this is how to are connecting? I wonder if Android does not like something about the Live Gamer box monitor information and disconnects it for security reasons? That's all I can think of. Wim |
06-15-2018, 07:39 AM | #4 |
Junior Member
Join Date: Jun 2018
Posts: 2
|
DisplayLink Presenter appears to be blocked
I am experiencing a strange behavior on "Samsung Galaxy Tab S3". "Device Maintenance" is a system app on this device.
I need to establish wired connection from the tab to projector. Since MHL is not supported on the tab, I use DisplayLink adapters with "DisplayLink Presenter" app. DisplayLink works as 'Plug and Display' like MHL. DisplayLink service runs as background process, captures screens and streams over USB bus. I have several tabs (including Samsung Note Pro 12.2, Lenovo etc.) - my setup works perfectly on all but "Samsung Galaxy Tab S3" tabs(I have multiple units). If I change USB mode from notification bar, the USB mode is falling back to charging automatically. Normally I see system message to allow screen capture and streaming confirmation dialog as soon as DisplayLink adapter is connected on OTG. I suspect "Device Maintenance" is killing "DisplayLink Presenter" service. I have disabled power save mode in "Device Maintenance". But I cannot make my setup working from "Samsung Galaxy Tab S3". Your help in resolving this issue is much appreciated. DisplayLink Presenter: https://play.google.com/store/apps/d...link.presenter Regards, - Arup Roy |
|
|