![]() |
|
![]() |
#1 |
Junior Member
Join Date: Oct 2013
Posts: 6
|
![]()
Laptop: Asus U36SD i5Core, 8GB RAM
OS: Windows 7 64 bit USB Host Controller: Frsco Logic FL1000 USB Host Controller Driver Version: 3.5.100.0 Display Link Driver Version: 7.4.51587.0 Device: Targus Universal USB 3.0 DV Docking Station : ACP70USZ Cannot get DisplayLink to launch when plugging in the docking station. The two external monitors just stay blank. This has been happening since I bought the Targus device. I've tried a variety of unplugging and powering on of the Targus, Laptop and Monitors. No luck. This has been a problem since I bought the Targus 7 months ago. If the Targus loses power the laptop doesn't detect the monitors when it is plugged back in. This forum is my last attempt to get this working before I throw the Targus out and avoid DisplayLink devices forever. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
![]()
Hi,
Sorry hadn't seen this until now as it was in the general sub forum. Can you start by trying the registry patch attached to this thread? http://www.displaylink.org/forum/sho...=fresco&page=2 Let me know how you get on. Thanks, James |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Oct 2013
Posts: 6
|
![]()
Hi James,
The registry patch did not work. I downloaded, unzipped and double clicked it. It said it applied. No change. I rebooted. No change. Unplugged and re-plugged in the Targus. No change. Leaving the USB connected, I unplugged and replugged in the Targus power. No change. The DisplayLink just never gets launched. The monitors just sit there with their standby power blinking. The DisplayLink has worked in the past with this configuration. For no rhyme or reason it just stops working. Then when some strange combination of powering on/off or plugging in the USB cable is performed it works. This time, I just can't figure out what that combination is. The monitors just never get detected. |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Oct 2013
Posts: 6
|
![]()
Here's a screenshot of my USB hub:
![]() |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Oct 2013
Posts: 6
|
![]()
James,
I have gone through this process that I see you have directed others to: http://www.displaylink.org/forum/showthread.php?t=896 The Display Link services are there and running. What is missing is the "Check the DisplayLink USB device appears in the device manager." I do not have any DisplayLink or USB display items in my device manager. Hope this is helpful. Last edited by pipbailey; 10-21-2013 at 12:51 AM. |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jun 2013
Location: California
Posts: 56
|
![]()
Please be sure to have the latest FrescoLogic driver v. 3.5.100.0 from http://frescologic.com/support.php installed.
Targus is aware of a hardware issue that has recently been diagnosed with some ACP70 docks. This issue is most easily recognized in the Windows Device Manager where no USB Display Adapters and no Targus Giga Ethernet Network adapters are present. It is also when neither of the dock’s display ports or Ethernet ports work at all. The issue is intermittent and temperature dependent, showing up mostly at colder temperatures. Manufacturing has produced at ECN for a workaround for all newly manufactured docks but for deployed units that exhibit the misbehavior, please contact Targus for a free exchange. |
![]() |
![]() |
![]() |
|
|