After removing the old and new driver, and reinstalling it from scratch, I now have one monitor working, but not another (I have two identical monitors connected to D6000 dock in the same way). I have checked that it's not the monitor to blame (if I swap the two connectors at the D6000 side, the other monitor lits up).
I noticed that the following happens for one monitor but not the other:
[ 3590.453526] evdi: [D] evdi_painter_mode_changed_notify:505 (dev=2) Notifying mode changed: 1600x1200@60; bpp 32;
[ 3590.453528] evdi: [D] evdi_painter_mode_changed_notify:506 pixel format 875713112
[ 3590.453542] evdi: [D] evdi_painter_crtc_state_notify:481 (dev=2) Notifying crtc state: 0
[ 3590.453545] evdi: [D] evdi_painter_dpms_notify:468 (dev=2) Notifying dpms mode: 0
[ 3590.553575] evdi: [D] evdi_detect:75 (dev=2) Painter is connected
[ 3590.553578] evdi: [D] evdi_painter_get_edid_copy:215 (dev=2) 00 ff ff
Again, I tried everything including numerous reboots of every piece of equipment (monitors, laptop, dock), reconnecting the cables, etc. Is there anything I can debug?
|