View Single Post
Old 11-04-2020, 05:26 PM   #7
Crashdummy
Junior Member
 
Join Date: Nov 2020
Posts: 8
Default DisplayPort not working

Hello there,

I hope this is still the valid topic for my question.

I am able to install the displaylink driver quite fine, however the Monitors connected thorugh Displayports refuse to work with this kernel.

I did a clean install of Pop OS 20.10.

Code:
|19:07:02|crashdummy@pop-os:[~]> uname -a && lsb_release -a
Linux pop-os 5.9.3-surface #1 SMP Wed Nov 4 03:03:11 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
No LSB modules are available.
Distributor ID:	Pop
Description:	Pop!_OS 20.10
Release:	20.10
Codename:	groovy
Code:
|18:59:24|crashdummy@pop-os:[~]> lsmod | grep evdi
evdi                   53248  4
drm_kms_helper        221184  2 evdi,i915
syscopyarea            16384  2 drm_kms_helper,evdi
sysfillrect            16384  2 drm_kms_helper,evdi
sysimgblt              16384  2 drm_kms_helper,evdi
drm                   544768  14 drm_kms_helper,evdi,i915

|18:59:25|crashdummy@pop-os:[~]> sudo dkms status
[sudo] password for crashdummy: 
evdi, 1.7.0, 5.9.3-surface, x86_64: installed
system76, 1.0.9~1597073326~20.10~5b01933, 5.8.0-7625-generic, x86_64: installed
system76, 1.0.9~1597073326~20.10~5b01933, 5.9.1-surface, x86_64: installed
system76, 1.0.9~1597073326~20.10~5b01933, 5.9.3-surface, x86_64: installed
system76_acpi, 1.0.2~1600812457~20.10~0bc966c, 5.8.0-7625-generic, x86_64: installed (original_module exists)
system76_acpi, 1.0.2~1600812457~20.10~0bc966c, 5.9.1-surface, x86_64: installed (original_module exists)
system76_acpi, 1.0.2~1600812457~20.10~0bc966c, 5.9.3-surface, x86_64: installed (original_module exists)
system76-io, 1.0.1~1559663713~20.10~ea5f61a, 5.8.0-7625-generic, x86_64: installed
system76-io, 1.0.1~1559663713~20.10~ea5f61a, 5.9.1-surface, x86_64: installed
system76-io, 1.0.1~1559663713~20.10~ea5f61a, 5.9.3-surface, x86_64: installed

|18:59:36|crashdummy@pop-os:[~]> xrandr --listmonitors
Monitors: 2
 0: +XWAYLAND0 2736/260x1824/170+2560+239  XWAYLAND0
 1: +XWAYLAND1 2560/700x1440/400+0+0  XWAYLAND1
I am using This Dock from i-tec

I did all these steps as instructed.
The only way the monitors can produce some output is by connecting them with HDMI.
As this dock has only one HDMI Port I can't work around this issue for now...

I use This Lenovo USB-C Dock frequently, too.
The Displays here are connect with displayports only, thus no display can be connected at all.

Both dockings were working quite fine till Kernel 5.7 ( haven't tested since then )

Logs have been attached

Update: Restarting the displaylink service appears to get the second monitor to run:

Code:
|12:44:33|crashdummy@pop-os:[~]> sudo systemctl restart displaylink-driver
|12:44:33|crashdummy@pop-os:[~]> systemctl status displaylink-driver 
● displaylink-driver.service - DisplayLink Driver Service
     Loaded: loaded (/lib/systemd/system/displaylink-driver.service; static)
     Active: active (running) since Sat 2020-11-28 12:44:26 CET; 37s ago
    Process: 19260 ExecStartPre=/bin/sh -c modprobe evdi || (dkms install $(ls -t /usr/src | grep evdi | head -n1  | sed -e "s:-:/:") && modprobe evdi) (code=exited, status=0/SUCCESS)
   Main PID: 19262 (DisplayLinkMana)
      Tasks: 48 (limit: 8913)
     Memory: 73.9M
     CGroup: /system.slice/displaylink-driver.service
             └─19262 /opt/displaylink/DisplayLinkManager

Nov 28 12:44:26 pop-os systemd[1]: Starting DisplayLink Driver Service...
Nov 28 12:44:26 pop-os systemd[1]: Started DisplayLink Driver Service.
Attached Files
File Type: zip DLSupportTool_Output_2020-11-04T19:25:53.255962.zip (64.9 KB, 0 views)

Last edited by Crashdummy; 11-28-2020 at 10:49 AM.
Crashdummy is offline   Reply With Quote