Hello again,
after testing some combination I ended up with USB mouse & keyboard + DELL display connected via dock and Samsung via HDMI. The tell displays goes blank from time to time but does not disconnect (display manager thinks the display is still there, I can even move windows from that display).
On error, dmseg says:
Code:
[pią lis 17 08:45:03 2017 < 0,072060>] usb 4-1.1: reset SuperSpeed USB device number 5 using xhci_hcd
[pią lis 17 08:45:03 2017 < 0,034009>] usb 4-1.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong.
[pią lis 17 08:45:03 2017 < 0,000005>] usb 4-1.1: [4] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16
[pią lis 17 08:45:03 2017 < 0,000720>] usb 4-1.1: Warning! Unlikely big volume range (=672), cval->res is probably wrong.
[pią lis 17 08:45:03 2017 < 0,000002>] usb 4-1.1: [7] FU [Dell USB Audio Playback Volume] ch = 6, val = -10752/0/16
[pią lis 17 08:45:03 2017 < 0,027510>] cdc_ncm 4-1.1:1.5: MAC-Address: 9c:eb:e8:53:65:5a
[pią lis 17 08:45:03 2017 < 0,000002>] cdc_ncm 4-1.1:1.5: setting rx_max = 16384
[pią lis 17 08:45:03 2017 < 0,000066>] cdc_ncm 4-1.1:1.5: setting tx_max = 16384
[pią lis 17 08:45:03 2017 < 0,000232>] cdc_ncm 4-1.1:1.5 usb0: register 'cdc_ncm' at usb-0000:3e:00.0-1.1, CDC NCM, 9c:eb:e8:53:65:5a
[pią lis 17 08:45:03 2017 < 0,004123>] usb 4-1.1: usbfs: process 7796 (DeviceWindowDis) did not claim interface 0 before use
[pią lis 17 08:45:03 2017 < 0,003552>] cdc_ncm 4-1.1:1.5 enx9cebe853655a: renamed from usb0
[pią lis 17 08:45:03 2017 < 0,077602>] IPv6: ADDRCONF(NETDEV_UP): enx9cebe853655a: link is not ready
[pią lis 17 08:45:03 2017 < 0,000068>] IPv6: ADDRCONF(NETDEV_UP): enx9cebe853655a: link is not ready
[pią lis 17 08:45:03 2017 < 0,020318>] cdc_ncm 4-1.1:1.5 enx9cebe853655a: network connection: disconnected
Funny thing is, it seems to be totally random. Yesterday it happened only once. Today it already happened 4 times...
One more thing I noticed today is that sometimes dmesg spits out a bunch of these:
Code:
[pią lis 17 08:53:20 2017 < 0,009739>] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[pią lis 17 08:53:20 2017 < 0,000018>] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[pią lis 17 08:53:20 2017 < 0,000012>] pcieport 0000:00:1d.0: device [8086:a118] error status/mask=00001000/00002000
[pią lis 17 08:53:20 2017 < 0,000008>] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
Which seems to be an error with my SSD disk:
Code:
*-pci:3
description: PCI bridge
product: Sunrise Point-H PCI Express Root Port #9
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: f1
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:124 memory:ede00000-edefffff
*-storage
description: Non-Volatile memory controller
product: NVMe SSD Controller SM961/PM961
vendor: Samsung Electronics Co Ltd
physical id: 0
bus info: pci@0000:04:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: storage pm msi pciexpress msix nvm_express bus_master cap_list
configuration: driver=nvme latency=0
resources: irq:16 memory:ede00000-ede03fff
Sometimes I belive I could write a blog about my hardware issues xD