Quote:
Originally Posted by Wim
We're aiming to release a beta of v2.1 around the end of July which will have some fixes for 10.8 and early support for 10.9 Mavericks.
Wim
|
Hello,
Just curious if there was an update on the ETA for the support of 10.9.
It seems that in my setup the 2 (DL-195) adapters are seen and both connected displays are detected by the OS but only one display gets an image, the other just goes to sleep. There doesn't seem to be a way to pick which one works and which doesn't.
Code:
System Version: OS X 10.9 (13A524d)
DL-195 Adapter:
Product ID: 0x028f
Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.)
Version: 1.24
Serial Number: 108763
Speed: Up to 480 Mb/sec
Manufacturer: DisplayLink
Location ID: 0x1a140000 / 3
Current Available (mA): 500
Current Required (mA): 500
DL-195 Adapter:
Product ID: 0x028f
Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.)
Version: 1.24
Serial Number: 109393
Speed: Up to 480 Mb/sec
Manufacturer: DisplayLink
Location ID: 0x1d120000 / 4
Current Available (mA): 500
Current Required (mA): 500
$ ioreg -l |grep -A18 DL-195
| | | +-o DL-195 Adapter@1a140000 <class IOUSBDevice, id 0x1000001de, registered, matched, active, busy 0 (93 ms), retain 13>
| | | | | {
| | | | | "sessionID" = 2005743724
| | | | | "iManufacturer" = 1
| | | | | "bNumConfigurations" = 1
| | | | | "idProduct" = 655
| | | | | "bcdDevice" = 292
| | | | | "Bus Power Available" = 250
| | | | | "bMaxPacketSize0" = 64
| | | | | "USB Product Name" = "DL-195 Adapter"
| | | | | "iProduct" = 2
| | | | | "iSerialNumber" = 3
| | | | | "USB Address" = 3
| | | | | "bDeviceClass" = 0
| | | | | "bDeviceSubClass" = 0
| | | | | "locationID" = 437518336
| | | | | "IOUserClientClass" = "IOUSBDeviceUserClientV2"
| | | | | "PortNum" = 4
| | | | | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
| | | | | "bDeviceProtocol" = 0
| | | | | "USB Vendor Name" = "DisplayLink"
| | | | | "Device Speed" = 2
| | | | | "idVendor" = 6121
| | | | | "USB Serial Number" = "108763"
| | | | | "Requested Power" = 250
| | | | | "IOGeneralInterest" = "IOCommand is not serializable"
| | | | | "Low Power Displayed" = No
| | | | | }
--
| | | +-o DL-195 Adapter@1d120000 <class IOUSBDevice, id 0x10000395c, registered, matched, active, busy 0 (325 ms), retain 13>
| | | | {
| | | | "sessionID" = 91795823008025
| | | | "iManufacturer" = 1
| | | | "bNumConfigurations" = 1
| | | | "idProduct" = 655
| | | | "bcdDevice" = 292
| | | | "Bus Power Available" = 250
| | | | "bMaxPacketSize0" = 64
| | | | "USB Product Name" = "DL-195 Adapter"
| | | | "iProduct" = 2
| | | | "iSerialNumber" = 3
| | | | "USB Address" = 4
| | | | "bDeviceClass" = 0
| | | | "bDeviceSubClass" = 0
| | | | "locationID" = 487718912
| | | | "IOUserClientClass" = "IOUSBDeviceUserClientV2"
| | | | "PortNum" = 2
| | | | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
| | | | "bDeviceProtocol" = 0
| | | | "USB Vendor Name" = "DisplayLink"
| | | | "Device Speed" = 2
| | | | "idVendor" = 6121
| | | | "USB Serial Number" = "109393"
| | | | "Requested Power" = 250
| | | | "IOGeneralInterest" = "IOCommand is not serializable"
| | | | "Low Power Displayed" = No
| | | | }