DisplayLink Forum

DisplayLink Forum (https://displaylink.org/forum/index.php)
-   Linux and Open Source (https://displaylink.org/forum/forumdisplay.php?f=29)
-   -   Install Fail: Missing Component: libdrm Ub 20.04 (https://displaylink.org/forum/showthread.php?t=67090)

Jeins 05-04-2020 02:52 PM

Install Fail: Missing Component: libdrm Ub 20.04
 
1 Attachment(s)
I tried to install the latest driver on Ubuntu 20.04. On installation I get the error: Missing Component libdrm. I reinstalled it manually and let the installer install it. Both didn't work for me. My diagnose files are attached.

txtweet 05-04-2020 03:40 PM

I have exactly the same error. I tried to install lipdrm-common and lipdrm2 and lipdrm-dev by my own but nothing changed.

Jeins 05-04-2020 03:55 PM

Good to know. Then I wait before new install of ubunut.

jarsal 05-04-2020 04:24 PM

Same here:
Quote:

Unsatisfied dependencies. Missing component: libdrm.
This is a fatal error, cannot install DisplayLink Linux Software.

pac421 05-04-2020 04:36 PM

I got the same problem on my side. I tried to reinstall manually the libdrm-dev package but installation always output :

Quote:

Unsatisfied dependencies. Missing component: libdrm.
I was moving from the non-official displaylink-debian driver to the official displaylink 5.3 driver after receiving the release mail so I also tried to reinstall the non-official displaylink-debian driver and got the same error.

DrPolucion 05-04-2020 06:59 PM

Same problem in a clean installation

txtweet 05-04-2020 09:22 PM

I have done some other tests.
I have the same problem on a clean install of 18.04 with Displaylink 5.3 but Displaylink 5.2 can be installed without trouble.

Libdrm-dev seems to have been updated very recently. I think this is the problem and that's why the driver can't be installed anymore on a clean install.

I can't suceed to install the previous version of the libdrm-dev package but maybe it can solve the problem.

JakubDabrowski 05-05-2020 10:52 AM

Dear users,

Thank you for your constant communication here on the forum.

We would like to apologize for the inconveniences that you have faced while trying to use our new driver.
We are aware of libdrm issue on our new driver for Ubuntu 20.04

Right now our Engineering Team is working on the resolution of the problem. We should be able to release a fix very shortly as our engineers are already testing the possible solution for this case.

As a possible temporary workaround you may start our installer in this manner:

$ LANG=C ./displaylink-installer-5.xxx.run where xxx is the installer version.
This should help you for now before we have a permanent fix done.

Thank you very much for your patience and I will be posting here any new information we would be able to share with you!

Kind regards,
Jakub

Stofe7 05-05-2020 12:57 PM

Thank you, but still issue:

sudo LANG=C ./displaylink-driver-5.3.0.28.run

Verifying archive integrity... 100% All good.
Uncompressing DisplayLink Linux Driver 5.3.0.28 100%
DisplayLink Linux Software 5.3.0.28 install script called:
Distribution discovered: Ubuntu 20.04 LTS

Installing

[ Installing EVDI ]
[[ Installing EVDI DKMS module ]]
Error! DKMS tree already contains: evdi-1.7.0
You cannot add the same module/version combo more than once.
EVDI DKMS module already installed.
[[ Installing module configuration files ]]
[[ Installing EVDI library ]]
cc -I../module -std=gnu99 -fPIC -c -o evdi_lib.o evdi_lib.c
In file included from evdi_lib.c:5:
/usr/lib/gcc/x86_64-linux-gnu/9/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
make: *** [<builtin>: evdi_lib.o] Error 1
ERROR: Failed to build evdi/5.3.0.28 library.

greghead 05-05-2020 04:44 PM

I had the same issue with the
Quote:

Unsatisfied dependencies. Missing component: libdrm.
Message. After using
Quote:

LANG=C ./displaylink-driver-5.3.0.28.run
it worked for me with 20.04 LTS fresh installation and latest updates installed.

I tried the older Firmware with 19.10 and it was really laggy. Not it's working pretty good. I'm happy with the performance and i hope it will keep that good :)

ribakip304 05-05-2020 10:06 PM

Quote:

Originally Posted by JakubDabrowski (Post 89825)
As a possible temporary workaround you may start our installer in this manner:

$ LANG=C ./displaylink-installer-5.xxx.run where xxx is the installer version.
This should help you for now before we have a permanent fix done.

Working great!
Thanks a lot for the fast reply !

JakubDabrowski 05-06-2020 06:33 AM

Hello,

Thank you for your patience.

As I have mentioned yesterday, we were working on a installation fix for Ubuntu 20.04.

Here it is: https://www.displaylink.com/downloads/file?id=1576

Please verify that version and if you would face any issues inform us.

Thank you very much for your cooperation!

Best regards,
Jakub

Stofe7 05-06-2020 12:08 PM

My reported issue is still valid with the 5.3.1 driver.
I've tried to uninstall and install again, but I got the same result:

"/usr/lib/gcc/x86_64-linux-gnu/9/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated."

Best,

1kenthomas 05-06-2020 09:49 PM

Newest driver hangs system ...
 
Hi Jakub,

Unfortunately, after using the below, my system hangs after login. I can only get to a recovery root command prompt. Using the script to attempt uninstall of the driver does not work, "Display not found" (it appear to assume a graphical environment).

Can someone over there provide instructions to disable / remove the driver from the command line, so I can get back in working order?

Thanks, Ken

UPDATE: using .run, I was almost able to get somewhere by booting into the -29 kernel (required) and using LANG=C for the installer, but am stuck at "component linux-headers not available" even through headers for -29 are installed.

Using displaylink-debian.sh, --uninstall is still blocked by "Can't open display", alas.

UPDATE2: I got out of this situation by installing lightdm from the command line, which got me into a UI. Problem may only be with gdm3? Able to uninstall, will post the loop situation that caused hang from syslog when I have a chance.[/B]



Quote:

Originally Posted by JakubDabrowski (Post 89847)
Hello,

Thank you for your patience.

As I have mentioned yesterday, we were working on a installation fix for Ubuntu 20.04.

Here it is: https://www.displaylink.com/downloads/file?id=1576

Please verify that version and if you would face any issues inform us.

Thank you very much for your cooperation!

Best regards,
Jakub


jarsal 05-07-2020 10:53 AM

Quote:

Originally Posted by JakubDabrowski (Post 89825)
Dear users,

Thank you for your constant communication here on the forum.

We would like to apologize for the inconveniences that you have faced while trying to use our new driver.
We are aware of libdrm issue on our new driver for Ubuntu 20.04

Right now our Engineering Team is working on the resolution of the problem. We should be able to release a fix very shortly as our engineers are already testing the possible solution for this case.

As a possible temporary workaround you may start our installer in this manner:

$ LANG=C ./displaylink-installer-5.xxx.run where xxx is the installer version.
This should help you for now before we have a permanent fix done.

Thank you very much for your patience and I will be posting here any new information we would be able to share with you!

Kind regards,
Jakub

New script works for me, external monitors are working now, but they are unsable.
After connecting dock, cpu usage is above 100% and external monitors are laggy, unsable.
Graphics cards: Radeon Vega 8 Graphics/Radeon RX 560X. Everything is working correctly on windows.

JakubDabrowski 05-08-2020 08:18 AM

Hello,

Here is the message for three of our users: Strofe7, 1kenthomas and jarsal:

Strofe7:

Could you please use the command sudo apt-get install build-essential ?
It will install the compiler and basic C libraries.

Please let me know if that resolves your issue.

1kenthomas:

Please use the following commands in your console:

rm -f /etc/modprobe.d/evdi.conf
rm -f /etc/modules-load.d/evdi.conf


It will change the auto-loading of evdi module while booting. Please also follow this guide and gather log files for me.

Thank you for the log files and further information.

jarsal:

We would need to have the log files that you can gather by following this guide.

Additionally, please also gather Gnome output for us by using this command:
journalctl /usr/bin/gnome-shell > gnome_shell.txt and attach the file created by it.

If this is possible we would like also to see a short video showing the mentioned lags. That would help us greatly.



Thank you to every single one of you for your actions and patience. We will be verifying your cases as soon as we got these new information from you.

If you would like to move from the forum for a email communication, please write back on: technical_enquiries@displaylink.com

Best regards,
Jakub

Stofe7 05-08-2020 01:18 PM

Thank you very much, it's works like a charm :)

disconnect dock
Code:

sudo apt-get install build-essential
sudo ./displaylink-driver-5.3.1.34.run

reboot

No lag or any other issue.

GoSaneFr 05-09-2020 04:26 PM

The workaround worked for me. Upgrading from Kubuntu 19.10 (Xorg)

thejenne18 05-11-2020 02:18 PM

Error! DKMS tree already contains: evdi-1.7.0
 
We are using version 5.3.1.34 on ubuntu 20.04 and we see still the same error:

HTML Code:

[ Installing EVDI ]
[[ Installing EVDI DKMS module ]]
Error! DKMS tree already contains: evdi-1.7.0
You cannot add the same module/version combo more than once.
EVDI DKMS module already installed.
[[ Installing module configuration files ]]
[[ Installing EVDI library ]]
cc -I../module -std=gnu99 -fPIC    -c -o evdi_lib.o evdi_lib.c
cc evdi_lib.o -shared -Wl,-soname,libevdi.so.0 -o libevdi.so.1.7.0 -lc -lgcc
cp libevdi.so.1.7.0 libevdi.so
[ Installing x64-ubuntu-1604/DisplayLinkManager ]
[ Installing libraries ]
[ Installing firmware packages ]
[ Installing licence file ]
[ Adding udev rule for DisplayLink DL-3xxx/4xxx/5xxx/6xxx devices ]
[ Adding upstart and powermanager sctripts ]


jarsal 05-13-2020 09:34 AM

Quote:

Originally Posted by JakubDabrowski (Post 89869)
Hello,

Here is the message for three of our users: Strofe7, 1kenthomas and jarsal:

Strofe7:

Could you please use the command sudo apt-get install build-essential ?
It will install the compiler and basic C libraries.

Please let me know if that resolves your issue.

1kenthomas:

Please use the following commands in your console:

rm -f /etc/modprobe.d/evdi.conf
rm -f /etc/modules-load.d/evdi.conf


It will change the auto-loading of evdi module while booting. Please also follow this guide and gather log files for me.

Thank you for the log files and further information.

jarsal:

We would need to have the log files that you can gather by following this guide.

Additionally, please also gather Gnome output for us by using this command:
journalctl /usr/bin/gnome-shell > gnome_shell.txt and attach the file created by it.

If this is possible we would like also to see a short video showing the mentioned lags. That would help us greatly.



Thank you to every single one of you for your actions and patience. We will be verifying your cases as soon as we got these new information from you.

If you would like to move from the forum for a email communication, please write back on: technical_enquiries@displaylink.com

Best regards,
Jakub

Cześć*Jakub,
i'm sending email to technical_enquiries@displaylink.com with all informations that you wanted. Please let me know if you need more data to fix this issue.

stream 05-31-2020 10:15 PM

Ubuntu 20.04, Driver 5.3.1, still error: "Unsatisfied dependencies. Missing component: libdrm".
with LANG=C - same error.

stream 05-31-2020 10:57 PM

Quote:

Originally Posted by stream (Post 90046)
Ubuntu 20.04, Driver 5.3.1, still error: "Unsatisfied dependencies. Missing component: libdrm".
with LANG=C - same error.

the issue was in oibaf mesa drivers, with default - everything is ok.
But, very big performance lag.


All times are GMT. The time now is 03:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.