DisplayLink Forum

DisplayLink Forum (https://displaylink.org/forum/index.php)
-   CLOSED: Windows 8.1 Software (https://displaylink.org/forum/forumdisplay.php?f=47)
-   -   Bum Dock? (Lenovo USB 3.0) (https://displaylink.org/forum/showthread.php?t=61977)

acushner 09-05-2013 07:49 PM

Bum Dock? (Lenovo USB 3.0)
 
How do I tell if the problems I am having with my dock are software or hardware? I have the latest 8.1 driver (7.4) and my firmware from Lenovo is up to date. The dock keeps being disconnected from the laptop (X1 Carbon Touch) rendering it almost useless. Any help would be greatly appreciated. Thanks!

JamesH 09-06-2013 02:48 PM

Hi,

Please run through this guide:
http://www.displaylink.org/forum/showthread.php?t=896

If the issue persists please attach the debug logs:
http://www.displaylink.com/support/ticket.php?id=269

Thanks,
James

acushner 09-18-2013 06:00 PM

Happening again
 
1 Attachment(s)
Sorry for the delay. The dock suddenly started working without issue until today when it again has gone back into the circular pattern of connecting and disconnecting every few seconds. Attached are the debug logs.

JamesH 09-23-2013 10:49 AM

Hi,

The support files tell us that there are usb connection errors.

Can you check if you have the latest hub firmware programmed?

Open up device manager, open up Universal Serial Bus controllers and right click on the entry called “Generic SuperSpeed USB Hub”.
Select “Properties”, select “Details”, change “Property” to “Hardware Ids” and the REV_xxxx value will tell you what version of firmware is programmed on the hub.

Let me know what revision is reported.

I didn't see the System_Details file in the collected logs - can you attach this so I can advise on your system?

It's also worth trying the "System Compatibility Check" option in the DisplayLink debug tool to see if anything is flagged up.

Thanks,
James

acushner 09-23-2013 05:57 PM

1 Attachment(s)
The Generic Superspeed USB Hub shows up twice in the Device manager, both with the same hardware ID: USB\VID_2109&PID_0811&REV_2198.

The compatibility check shows:
Pass: Basic mode support
Pass: Device attached
Pass: Device started correctly
Pass: Graphics driver date
Pass: WEI is above recommended 3
Pass: No Other USB graphics software installed

System Details attached. Thanks!

JamesH 09-27-2013 04:25 PM

Hi,

Thanks for the info.

I'd try the other port(s) on the system you are using and if possible try a different USB cable.

Thanks,
James

acushner 10-07-2013 06:25 PM

I will try a new cable but since this is a Lenovo X1 Carbon Touch, it only has one USB 3.0 port. Thanks!


All times are GMT. The time now is 12:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.