bitshifter
04-28-2012, 01:52 AM
Just got a MyGica US 195A. Hooked it up to a Toshiba 24SL410U.
The highest resolution listed is 1360 x 768. (This is a 1080p panel.)
No problem with this panel when connected via the DisplayPort on same computer.
I've tried the 1.7 DisplayLink driver and the 1.8a1 driver. No change.
I also updated the firmware on the Toshiba. No change.
The MyGica shows the max resolution when hooked up to a Gateway monitor from the same computer.
Is the DisplayLink device not reading the EDID of the Toshiba correctly?
The dl.log shows entries such as this:
00:00.54 AppDevice USB_c054-108026 INFO AppDevice.cpp:411 Modes: EDID: monitor TSB0200 (TOSHIBA-TV) modes: 640x480@59.9405, 800x600@56.25, 800x600@60.3165, 1024x768@60.0038, 1280x768@59.8702, 1360x768@60.0152
00:00.54 AppDevice USB_c054-108026 INFO AppDevice.cpp:519 Modes: Supported: 640x480x16@59.9405, 640x480x24@59.9405, 800x600x16@56.25, 800x600x24@56.25, 800x600x16@60.3165, 800x600x24@60.3165, 1024x768x16@60.0038, 1024x768x24@60.0038, 1280x768x16@59.8702, 1280x768x24@59.8702, 1360x768x16@60.0152, 1360x768x24@60.0152
00:00.60 Screen 0051DC70 ERROR Screen.cpp:420 Screen::getScreenDictionary: did not find service
00:00.60 (Anon) 0101A9A0 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 (Anon) 00619CD8 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 (Anon) 0061A048 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 UpdateEngineThread 01AB5908 INFO UpdateEngineThread.cpp:1110 Reset: Sync mode requested 0
00:12.04 NivoRawV2 USB_c054-108026 ERROR RawV2.cpp:104 Reading EDID Failed : Changed from Okay to No Bytes
00:12.04 DeviceRaw USB_c054-108026 INFO DeviceRaw.cpp:184 Monitor status change on USB_c054-108026 from {1,1,175} to {0,0,0}
00:13.04 DeviceRaw USB_c054-108026 INFO DeviceRaw.cpp:184 Monitor status change on USB_c054-108026 from {0,0,0} to {1,1,175}
It seems to read an incomplete sets of resolutions and then a few entries later just says that reading the EDID failed.
Thoughts? Solutions?
The highest resolution listed is 1360 x 768. (This is a 1080p panel.)
No problem with this panel when connected via the DisplayPort on same computer.
I've tried the 1.7 DisplayLink driver and the 1.8a1 driver. No change.
I also updated the firmware on the Toshiba. No change.
The MyGica shows the max resolution when hooked up to a Gateway monitor from the same computer.
Is the DisplayLink device not reading the EDID of the Toshiba correctly?
The dl.log shows entries such as this:
00:00.54 AppDevice USB_c054-108026 INFO AppDevice.cpp:411 Modes: EDID: monitor TSB0200 (TOSHIBA-TV) modes: 640x480@59.9405, 800x600@56.25, 800x600@60.3165, 1024x768@60.0038, 1280x768@59.8702, 1360x768@60.0152
00:00.54 AppDevice USB_c054-108026 INFO AppDevice.cpp:519 Modes: Supported: 640x480x16@59.9405, 640x480x24@59.9405, 800x600x16@56.25, 800x600x24@56.25, 800x600x16@60.3165, 800x600x24@60.3165, 1024x768x16@60.0038, 1024x768x24@60.0038, 1280x768x16@59.8702, 1280x768x24@59.8702, 1360x768x16@60.0152, 1360x768x24@60.0152
00:00.60 Screen 0051DC70 ERROR Screen.cpp:420 Screen::getScreenDictionary: did not find service
00:00.60 (Anon) 0101A9A0 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 (Anon) 00619CD8 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 (Anon) 0061A048 WARN Logger.cpp:1155 Anonymous Logged Object Created
00:00.70 UpdateEngineThread 01AB5908 INFO UpdateEngineThread.cpp:1110 Reset: Sync mode requested 0
00:12.04 NivoRawV2 USB_c054-108026 ERROR RawV2.cpp:104 Reading EDID Failed : Changed from Okay to No Bytes
00:12.04 DeviceRaw USB_c054-108026 INFO DeviceRaw.cpp:184 Monitor status change on USB_c054-108026 from {1,1,175} to {0,0,0}
00:13.04 DeviceRaw USB_c054-108026 INFO DeviceRaw.cpp:184 Monitor status change on USB_c054-108026 from {0,0,0} to {1,1,175}
It seems to read an incomplete sets of resolutions and then a few entries later just says that reading the EDID failed.
Thoughts? Solutions?