02-22-2011, 12:23 PM | #2 |
Junior Member
Join Date: Jan 2011
Posts: 3
|
Work around?!
I had a problem with my TV not working when connected to HDMI mode but working perfectly in VGA. I think this might be similar to your problem. (My post "HDMI not working" posted 1/31/11).
It turned out that the problem was not with Display-link but the software that operated my Warpia adapter didn't load. After contacting their customer service I got a work around link. So my advise would be to contact your hardware SC and see if they can tell you if the software is loaded properly that operates the HDMI. I got no errors other than "no signal" on the TV screen when I switched to HDMI mode. |
|
|