|
10-03-2014, 03:31 PM
|
#1 |
|
Junior Member
Join Date: Oct 2014
Posts: 3
|
Sleeping Monitor
I am having the same problem a lot of people seem to be having. The monitor connectioned to my IOGear GUC2020dw6 goes to sleep. Right after installing the displayLink drivers, all is good. Once the PC is rebooted, the monitor is recognized by Win 7 but goes to sleep. If I remote into the PC using I can see both monitors, but the user at the PC can still only see the main one. I am not getting the PID_8063. I have attached the log files requested. We currently have 50 to 60 attached to PCs and some work and some do not.
|
|
|
|
10-06-2014, 04:59 PM
|
#2 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Something is up with the hardware. Could you follow these steps to help me diagnose this? 1. Disconnect the adapter (if connected) 2. Disconnect the monitor from the known to fail adapter 3. Uninstall the DisplayLink software 4. Reboot 5. Install the DisplayLink software 6. Connect the known to fail adapter to the PC (but don't connect the monitor to the adapter) 7. Reboot 8. Run the support tool and attach the logs. Thanks, James |
|
|
|
|
10-09-2014, 10:47 AM
|
#3 |
|
Junior Member
Join Date: Oct 2014
Posts: 3
|
New log files
Hi James! Thanks for the quick reply. Here are the new log files after following your request.
|
|
|
|
|
10-22-2014, 05:24 PM
|
#4 |
|
Junior Member
Join Date: Oct 2014
Posts: 3
|
Still waiting
Still waiting for a reply from my last test.
|
|
|
|
 |
|
|
Linear Mode
