|
|
Thread Tools | Search this Thread | Display Modes |
|
11-01-2021, 09:01 PM | #1 |
Junior Member
Join Date: May 2020
Posts: 1
|
Hi,
I had a similar issue when I upgraded it to Monterrey but after I allowed it System Extensions in Security & Privacy preferences they disappeared it. I hope it would be useful for you Adrian |
12-10-2021, 08:35 PM | #2 |
Junior Member
Join Date: Dec 2021
Posts: 7
|
Hello, could you please describe step by step what you did to solve this? I don't see any option like that in security and privacy. Thank you
|
12-12-2021, 09:44 AM | #3 | |
Junior Member
Join Date: Dec 2020
Posts: 18
|
Quote:
It will be similar to instructions here: https://support.displaylink.com/know...ing-permission I also had some issues with ports not working, and I had to do a reset of the SMC. On an M1 Mac you have to turn it off, disconnect from power and close the lid for 30 seconds. This kinda worked but I ended up re-installing MacOS via non-destructive install via system restore. Bit of a pain but all working fine now. I guess a Kext didn't get installed properly, perhaps? Maybe make sure that all peripherals are unplugged if you need to do the reinstall step as I didn't do that when I first upgraded. |
|
12-12-2021, 03:09 PM | #4 | |
Junior Member
Join Date: Dec 2021
Posts: 7
|
Quote:
|
|
12-15-2021, 07:46 AM | #5 |
Junior Member
Join Date: Dec 2020
Posts: 18
|
No, it doesn't, you are correct. Apple advised me there is a sort of equivalent to it and as per my post this is reset by:
On an M1 Mac you have to turn it off, disconnect from power and close the lid for 30 seconds.
__________________
2021 M1 MacBook Pro, MacOS 12.01, Displaylink v1.6 (beta) - USB-C to Dell U3219C - Dell D6000 Dock (USB-C) with the August dell firmware update... which is connected, rotated to U2414H via Displayport |
Tags |
d6000, issue, issues, ports, usb |
|
|