12-04-2014, 12:54 PM | #1 |
Junior Member
Join Date: Dec 2014
Posts: 2
|
Identify #'s are not on individual monitors
I have 4 total monitors including the laptop screen on a Windows 8.1 machine.
When running programs maximizing and positioning windows are not accurately fixing to an individual monitor and parts of a window are going into the next window. When I click Identify under Screen Resolution on the desktop the numbers normally would be centered on each screen. However my issue is that the numbers are moved to the left slightly. 1 is on the laptop. 4 is on the next monitor and it is on the left side of monitor 2. 3 is right in between monitor 2 and 3. And finally 2 is on monitor 3 completely no part of the number is on the actual monitor that is in the picture. I have reinstalled all drivers, replaced the dock (it is a Dell Dock D3000), uninstalled and reinstalled Display link drivers, did a complete clean of the display link and reinstall. There are 3 different resolutions. I am having a hard time searching for this as the results I am getting are for setting the Identify number. That's not what I need the numbers are out of position from the real monitor. Another "clue" when I run the display link support tool and hit Gather Support information it turns off and turns back on all monitors. For about 10-20 seconds after that the numbers line up. Then it changes to the error state. |
12-08-2014, 12:21 PM | #2 |
Junior Member
Join Date: Dec 2014
Posts: 2
|
More Info
When I move locations with a different setup eg two add on monitors instead of three. The identify numbers are in the right locations but the windows are still slightly off so things don't work.
|
Tags |
identify numbers, monitor position. |
Thread Tools | Search this Thread |
Display Modes | |
|
|